영어에서 Rotation speed 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Rm Ta num Rotation speed, rpm, 3600 default.
High Efficiency Borewell Drilling Hammers Alloy Steel With 15-25r/Min Rotation Speed.
Seagate Barracuda 7200 is quite popular among hard drive brands as it is the first hard drive with a rotation speed of 7200 RPM.
The rotation speed of the 244 mm diameter chart is microprocessor controlled and user programmable.
Three light tubes be lighted together, rotation speed set 35,
Low vibration and stable rotation speed creates the best machining conditions.
Intuitive operation Intuitively positioned control knobs allow immediate and convenient adjustment of heating temperature and rotation speed.
The rotation speed of the kneading shaft was set to 4 of the cleaning shaft to 16 rpm.
Polishing force, polishing time and pipe rotation speed can be adjusted with good polishing effects.
Hydraulic Crawler Drills SM-300 Double Motor Lifting Force 50KN With High Rotation Speed.
SATA II hard drives include a 3.0Gb/s interface with 8MB of cache and rotation speed of 7,200RPMs, and use NCQ for enhanced performance.
The rotation speed of the material controlling cam is equal to heat pressing cam,
Two rolls with different relative rotation speed, rubber roller into two slot by mechanical processing.
If you select the User defined entry from the Print quality profile drop-down menu, you can change the contrast level and the rotation speed.
If the rotation speed does not go up, use an amplifier to increase the rotation speed.
When the brush is worn out 10mm, it is necessary to increase the rotation speed to expand the brush enough to deburr.
U Type Horizontal Poultry Feed Mixer Grinder 500Kg/P Capacity 33r/Min Rotation Speed.
Kva 3 Phase Brushless Ac Generator 60 Hz With 1800 R/ Min Rotation Speed.
1. Perfect machining ability. 2. Stable rotation speed.
The combined control of pump variable flows and gear shifting of gearbox can meet the demand of differential rotation speed under drilling and reaming conditions.