INJECTOR - pagsasalin sa Ingles

mga produkto ng auto injector ng Mylan's epinephrine..

Mylan's epinephrine auto injector products..

tulad ng grease o oil feeding injector, tinutulak ang grasa o langis sa medyas.

as grease or oil feeding injector, pressurized the grease or oil to the hose.

naglilimita sa pag-install ng sistema sa isang simpleng injector pump na supplies sa 4 cylinders.

which limits the system installation to a single pump injector that supplies 4 cylinders.

nagdidirekta ng pampadulas sa silid ng pagsukat kung saan sa itaas ng HL-1 injector piston.

of entering oil or grease, directing the lubricant to the measuring chamber where above the HL-1 injector piston.

suplay ng langis at grasa na konektado sa pump at injector ay dapat na hinalinhan mula sa presyon dahil ang presyon sa port ng inletor ay dapat bumaba sa ibaba 4. 1Mpa.

grease supply line which connected with pump and injector must be relieved from pressure since the pressure at the inlet port of injector must drop below 4.1Mpa.

Derun EMT ay isa sa pinakamalaking supplier ng fuel injector spacers, pag-aayos gaskets,

Derun EMT is one of the largest suppliers of fuel injector spacers, adjusting gaskets,

Ang unang yugto ay ang normal na posisyon ng HL-1 injector, habang ang naglalabas na kamara

The first stage is the normal position of the HL-1 injector, while the discharge chamber filled with oil,

lamang ang pag-aayos ng dami ng pagpapakain ng injector sa zero, o i-screw out ang injector

just adjusting the feeding volume of injector to zero, or screw out the injector

Habang ang paglabas ng grasa o langis sa outlet port ay nakumpleto, ang injector piston at inlet valve ay nananatili sa normal na posisyon nito hanggang sa presyon ng pampadulas sa bawat punto ng pagpapadulas sa pamamagitan ng linya ng supply.

While the discharge of grease or oil to outlet port is completed, the injector piston and inlet valve remain to its normal position until lubricant pressure to each lubrication point through the supply line.

ang paghila disk ng hinimok wheel gawin ang reciprocating paggalaw ng grasa piston pump upang discharge grasa mula bawat pagpapadulas pump injector.

the pulling disk of driven wheel make the reciprocating motion of grease piston pump in order to discharge grease from each lubrication pump injector.

Ang istruktura ng injector ay dinisenyo bilang piston type,

The structure of injector is designed as piston type,

Ang Hindi Injector.

The Needless Injector.

Responsibilidad ko ang mga injector.

The injectors are my responsibility.

Kapag ang bahagi ng bahay ng injector.

The opening in the Injector housing.

Paano isara ang ilang mga injector.

How to close certain injectors.

Ano ang ginagawa ng fuel injector?

How do fuel injectors work?

Ano ang ginagawa ng fuel injector?

What does fuel injector do?

NTS709 karaniwang rail injector test bench.

CR-YB690 karaniwang rail injector tester simulator.

Mga karaniwang rail injector stage 3 tools.

CRM900 stage 3 common rail injector stroke measuring.

Kapag ang bahagi ng bahay ng injector.

Assemble the rest of the injector.

Mga halimbawa ng mababang kalidad na pangungusap