"信号线" is not found on TREX in Chinese-English direction
Try Searching In English-Chinese (信号线)

Low quality sentence examples

缺点:差分信号线的主要缺点是增加了PCB的面积。
The main disadvantage of differential signal lines is the increased PCB area.
它们的宽度关系是:地线>电源线>信号线
Their relationship is: ground line> power line> signal line.
然而,MACD-直方图正在测量MACD与其信号线之间的距离。
The MACD histogram measures the distance between the MACD and its signal line.
然而,MACD-直方图正在测量MACD与其信号线之间的距离。
The MACD bar chart aims at measuring the distance between the signal line and MACD itself.
容易受影响的设备和信号线,应尽量远离变频器安装;
The devices and signal lines which are easily affected, should be installed as far as possible from the frequency inverter drive;
不能充分的隔离敏感线路和噪声信号线是常常出现的问题。
Not adequately isolating sensitive lines and noise signal lines are often problems.
不能充分的隔离敏感线路和噪声信号线是常常出现的问题。
Insufficient isolation of sensitive lines and noise signal lines is a frequent problem.
它被用于将-110V的电压传输给USB接口的信号线
It is used to apply the -110V to signal lines of the USB interface..
不能充分的隔离敏感线路和噪声信号线是常常出现的问题。
Inadequate isolation of sensitive lines and noise signal lines is a common problem.
任何信号线都不要形成环路,如不可避免,环路应尽量小;信号线的过孔要尽量少;
Any signal lines do not form a loop, if unavoidable, the loop should be as small as possible;
无线信号报警,无需外接信号线,真正的全无线对射。
Wireless signal alarm, no need of external signal line, real full wireless shooting.
模拟控制信号线应使用双绞屏蔽线,线径为0.75mm2。
Analog control signal line should use double stranded wire shielding line, specifications for 0.75mm2.
信号线是MACD线的指数移动平均线。
The signal line is a moving average of the MACD line..
信号线是MACD线的指数移动平均线。
The signal line is an average of MACD line..
对于信号线来说,高频的信号线应该尽可能的远离敏感的模拟电路器件。
For the signal line, the high-frequency signal line is as far as possible away from the sensitive analog circuit device.
以下的线是必须要接的:控制卡的模拟量输出线、使能信号线、伺服输出的编码器信号线
The following line must be connected: control card analog output line enable signal line, the servo output of the encoder signal line.
接口信号线按功能一般可分为数据信号线、控制信号线、定时信号线和接地线等四类。
Interface signal line according to the functions can be divided into data signals, control signal lines, timing signal line and ground lines, and four categories.
信号线.
The Signal line.
信号线用.
Automobile Signal Line.
叉蓝色信号线.
The Blue Signal line.