碳钢 in English translation

• carbon steel
• carbon steels

Examples of using 碳钢 in Chinese and their translations into English

因为碳钢的粉粒会嵌入到不锈钢表面，很容易造成腐蚀。
Because the carbon steel particles are embedded in the stainless steel surface, it is easy to cause corrosion.

汞容器的合适材料为碳钢或不锈钢，在常温下这些不会与汞发生反应。
Appropriate material for mercury containers is carbon or stainless steel which does not react with mercury at ambient temperatures.

适当增加碳钢中锰含量，并加入微量钒、钛、铌等合金元素，可大大提高钢的强度。
Appropriate to increase the carbon content of manganese and add trace vanadium, titanium, niobium and other alloying elements, can greatly improve the strength of steel.

不锈钢的宽展(横变形)较大，马氏体不锈钢宽展为碳钢的1.3倍；.
Stainless steel spread greatly, the spread degree of martensitic stainless steel is 1.3 times of carbon steel;

熔化极活性气体保护电弧焊可适用于大部分主要金属，包括碳钢、合金钢。
Metal active gas shielded arc welding is applicable to most of the major metals, including carbon steel, alloy steel.

例如：在不锈钢中有一个内置的氧化铬层，它不存在于碳钢中。
There is an inbuilt chromium oxide layer in stainless steel, which isn't present in the carbon steel.

这样，每增加一吨不锈钢就可以代替4吨碳钢。
In this case, every increase in output to one ton of stainless steel can completely replace more than four tons of carbon steel.

LESS由两种可喷涂的涂料组成，可用于碳钢，陶瓷或其他硬质表面。
LESS consists of two sprayable coatings that can be used on carbon steel, ceramics or other hard surfaces.

熔融活性气体保护电弧焊可应用于大多数主要金属，包括碳钢、合金钢。
Metal active gas shielded arc welding is applicable to most of the major metals, including carbon steel, alloy steel.

锻坯材料可以是铜、铝、碳钢、合金钢、不锈钢和钛合金等，材料利用率可达80～90%。
The forging material can be copper, aluminum, carbon steel, alloy steel, stainless steel and titanium alloy, and the material utilization rate can reach 80-90%.

锻造毛坯材料可为铜、铝、碳钢、合金钢、不锈钢和钛合金，材料利用率可达到80~90%。
The forging material can be copper, aluminum, carbon steel, alloy steel, stainless steel and titanium alloy, and the material utilization rate can reach 80-90%.

印度低碳钢价格.
Price of Low-carbon Steel.

是低碳钢的材质。
Material is low carbon steel.

低碳钢（含碳量小于0.25％）、?
Carbon steel(with less than 0.25% carbon)?.

不锈钢与碳钢：有什么区别？?
Stainless Steel vs Carbon Steel: What's the Difference?

低碳钢可根据客户要求专门制造。
Low carbon steel can be manufactured specifically to suit customer's requirements.

低碳钢的熔点大约在1500℃左右。
Melting point of low-carbon steel is around 1450°C.

总体经济效益远远优于碳钢的使用。
Economic benefits are much better than using carbon steel.

不锈钢：通常是在碳钢基础上。
(3) Stainless steel: usually based on carbon steel..

炼钢过程以及去氧方法会影响低碳钢的特性。
The steelmaking process as well as the deoxidation method can influence the properties of low carbon steel.