Low quality sentence examples
这具有突出表面粗糙度的作用;
This has the effect of highlighting surface roughness;通常，表面粗糙度可以取为0.008。
Generally, the surface roughness can be taken as 0.008.ISO468:1982表面粗糙度参数、参数值及给定要求的通则.
ISO 468:1982, Surface roughness Parameters, their values and general rules for specifying.它们具有晶界和表面粗糙度，它们散射电子，”Balandin说。
They have grain boundaries and surface roughness, which scatter electrons," Balandin explained.目标几何精度优于0.05毫米，最小表面粗糙度Rz=4微米。
Target values were 自动的求平均功能降低了测量数据范围内的表面粗糙度影响。
The auto averaging mode is used to reduce the effect of surface roughness on the measurement data range.若选择不当就将直接影响加工精度、表面粗糙度及生产效率。
If you choose improper will directly affect the processing accuracy, surface roughness and production efficiency.风速变化的替代和/或促成原因是土地表面粗糙度的变化。
The alternative and/or contributing cause of change 接下来，他们演示如何使用模型来回答有关表面粗糙度的特定问题。
They next demonstrate how models can be used to answer specific questions about surface roughness.必须考虑的主要实际参数是表面粗糙度，影像结构和形态学。
The main physical parameters that have to be considered are surface roughness, image texture and morphology.该applet还包括简单的测量，例如长度，深度和平均表面粗糙度。
The applet also includes simple measurements such as length, depth, and average surface roughness.加工方法的选择原则是保证加工表面的加工精度和表面粗糙度。
The principle of selection of the processing method is to ensure the processing accuracy and surface roughness of the machined Q--最佳内部几何结构和表面粗糙度（用于圆锥滚子轴承）。
Q- the best internal geometry and surface roughness(for tapered roller bearings.同样，零件的表面粗糙度也应根据匹配表面的实际需要进行调整。
Similarly, the surface roughness of parts should be made according to 影响扩散焊过程和接头质量的主要因素是温度压力扩散时间和表面粗糙度。
The main factors affecting the diffusion bonding process and joint quality are temperature pressure diffusion time and surface roughness.一种理论认为，地球的绿化或更多城市化正在增加表面粗糙度并限制风速。
One theory argued that the greening of the Earth or more urbanisation was increasing surface roughness and curbing wind speeds.使用这种技术,表面粗糙度的Ra0.008μm可以实现,这是最高的在不同抛光方法。
With this technology, a surface roughness of Ra0.008μm can be achieved, which is the highest among various polishing methods.通过对表面粗糙度的研究发现，互相摩擦体间的真实接触面积要小于表面接触面积。
Through investigation of the surface roughness, 因此，对卫生配件进行了专门的抛光处理，以减少或有时完全去除该表面粗糙度。
Therefore, sanitary fittings are specially polished to reduce, or sometimes completely remove, this surface roughness.表面加工也称为表面粗糙度，用于测量表面的一些小型不规则度。
