"Machinability" is not found on TREX in Korean-English direction
Try Searching In English-Korean (Machinability)

Low quality sentence examples

그것에는 AISI B1112에 관련된 45%의 machinability 등급이 있습니다.
It has a machinability rating of 45% relative to AISI B1112.
노후화에 제일 machinability를 줍니다, 그러나 해결책 처리는 대부분의 신청을 위해 적당합니다.
Over aging gives best machinability, but solution treatment is suitable for most applications.
자격을 주는 Machinability 가공.
Qualified Processing Machinability.
그것에는 고강도, 좋은 착용 저항, 온건한 충격 저항 및 좋은 machinability가 있습니다.
It has high strength, good wear resistance, moderate impact resistance, and good machinability.
그것에는 많은 강철에 대등한 힘과 더불어 강하, goodfatigue 힘과 평균 machinability가 있습니다.
It is strong, with a strength comparable to many steels, and has goodfatigue strength and average machinability.
급료 416 강철은 모든 스테인리스의 가장 높은 85%의 machinability를 가진 자유롭 기계로 가공 스테인리스 입니다.
Grade 416 steel is a free-machining stainless steel with a machinability of 85%, highest of all stainless steels.
(B1212와 비교되는) Machinability 등급은 대략 78%입니다.
Machinability Rating(compared to B1212) is approximately 78.
좋은 기계를 유지하고 있는 동안 합금 303는 특별히 개량된 machinability를 전시하기 위하여 디자인되었습니다.
Alloy 303 was specially designed to exhibit improved machinability while maintaining good mechanical.
도자기, 그것은에서 주문하기 위하여 한 청동색 방위 좋은 machinability를 제안하고 부식에 좋은 저항을 제안합니다.
Bronze Bearing made to order from china, It offers a good machinability and offers good resistance to corrosion.
방위 청동색 합금은 좋은 감마재 재산을, 충분한 힘 및 경도 소유하는, 다목적 방위 합금 충분한 연성 및 우수한 machinability입니다.
Bearing Bronze Alloys are general purpose bearing alloy possessing good anti-friction properties, ample strength and hardness, adequate ductility and excellent machinability.
우리의 무연 보충 수풀 안에, 지도는 다른 성분 대체됩니다, 그러나 제품은 아직도 특별하은 매끄러움, 견고, 착용, 힘, 경도 및 machinability를 제안합니다.
Within our lead-free replacement alloys, lead is replaced by other elements, but the products still offer exceptional lubricity, tightness, wear, strength, hardness and machinability.
지도 더 높은 유황 함류량의 추가 결과로 개량한 machinability를 가진 강철은, 제조공정 약 0.1%까지 S에 따라서, 요청에 공급될지도 모릅니다.
Steels with improved machinability as a result of the addition of lead or higher sulfur contents, depending on the manufacturing process up to around 0.1% S, may be supplied on request.
분말은 높은 압축 강도로 찬 isostaticpressing에 의하여 첫번째로 압축되고 좋은 machinability를 제안하기 위하여 그 후에 어느 정도까지 전 소결됩니다.
The powder are firstly compacted by cold isostatic pressing with high compressive strength and then pre-sintered to a certain degree to offer good machinability.
C1212의 속도의 대략 70%에 자동적인 나사 기계에 부속을 일으키기를 위해 즉시 이용될 수 있다 기계로 가공하게 정도에 어려운, 합금의 machinability를 강화합니다.
Difficult to machine, enhances the alloy's machinability to the degree that it can be readily utilized for producing parts on automatic screw machines at about 70% of the speed of C1212.
최고 코팅에 어떤 작은 찰상든지의 경우에는 냉각 압연된 강철판의 그것의 매끄럽고 아름다운 apperance 그리고 machinability에 있는 냉각 압연된 비금속 특징으로, 그러나, 가공된 준비된 강철판은 공기에 있는 냉각 압연된 비금속을 드러내골지도 드러낸 비금속은 빨리 부식할지도 모릅니다.
The prepainted steel sheet processed with cold-rolled base metal features in its smooth and beautiful apperance and the machinability of cold rolled steel sheet, however, in case of any tiny scratch on the top coating may expose the cold rolled base metal in the air and the exposed base metal may rust soon.
알루미늄 단면도의 machinability는 우수합니다.
The machinability of aluminum profiles is excellent.
알루미늄 단면도의 machinability는 우수합니다.
The machinability of aluminium profile is excellent.
그것의 우수한 machinability, 내식성, 및 고강도 때문에.
Because of its excellent machinability, corrosion resistance, and high strength.
타락 힘 없는 황의 강화된 machinability 독특한 직행 통제되는 추가.
An enhanced machinability characteristic through controlled addition of sulfur without degrading strength.
급료 303는 오스테나이트계 스테인리스 중 machinability에 있는 최적 조건을 대표합니다.
Grade 303 represents the optimum in machinability among the austenitic stainless steels.