"Nvme" is not found on TREX in Korean-English direction
Try Searching In English-Korean (Nvme)

Low quality sentence examples

최고 수준의 성능을 제공하는 완벽한 NVMe.
End-to-end NVMe for the highest levels of performance.
나래온 초기화 툴 다운로드 (SATA & NVMe.
Naraeon Secure Erase Download(SATA& NVMe.
AHCI, SATA 및 NVMe 컨트롤러도 사용할 수 있습니다.
AHCI, SATA, and NVMe controllers are also available.
나래온 초기화 툴 다운로드 (SATA & NVMe.
Category Archives: 나래온 NVMe 툴.
SSD는 SATA 또는 NVMe 중에서 선택이 가능합니다.
SSD and offers a choice of SATA or NVMe interface.
NVMe - 레거시 스토리지 제품용이 아닌 SSD용으로 설계.
NVMe- Designed for SSDs, not legacy storage products.
OWC, Mac 용 Aura Pro X2 NVMe SSD 업그레이드 출시.
OWC Launches Aura Pro X2 NVMe SSD Upgrade For Macs.
SATA 3 대 M.2 대 NVMe - 개요 및 비교.
SATA 3 vs M.2 vs NVMe- Overview and Comparison.
NVMe 포맷은 장치에 있는 모든 데이터를 삭제합니다.
NVMe format will erase all the data from the device.
NVMeoF(NVMe over Fabric)는 중요한 진전이다.
The NVMe over Fabrics(NVMeOF) is an emerging technology.
NVMe 지원을 위한 최소 칩셋/CPU 요건은 무엇입니까?
What is the minimum chipset/CPU requirement for NVMe support?
Intel RST NVMe 드라이버는 일부 Intel 칩셋 상에서만 지원됩니다.
The Intel RST NVMe driver is only supported on some Intel chipsets.
NVMe SSD는 기존 시스템에 새로운 생명을 불어 넣습니다!
An NVMe SSD injects your new life into the old system!
온보드 PCIe OCuLink 커넥터는 직접 부착 NVMe SSD 지원을 제공합니다.
Onboard PCIe OCuLink connectors provide direct-attach NVMe SSD support.
이러한 행동의 결과로 NVMe SSD의 성능이 감소합니다.
As a result of this behavior, the NVMe SSD's performance is reduced.
NVMe SSD는 기본 Linux 및 Microsoft NVMe 드라이버를 활용합니다.
Our NVMe SSD rely on native Linux and Microsoft NVMe drivers.
NVMe를 지원하는 새로운 마더 보드를 사야합니까?
Why not buy a new motherboard with NVMe support?
는 SSD의 NVMe를 설치하는 이유는 나이가 마더 보드의 NVMe SSD 설치… .
Install NVMe SSD on older motherboards Why install a NVMe SSD….
구형 마더 보드에 NVMe SSD 설치 왜 구형 마더 보드에 NVMe SSD를 설치해야합니까?
Installing NVMe SSDs on Older Motherboards Why Install an NVMe SSD on an Older Motherboard?
nvd(4)와 nvme(4) 드라이버가 FreeBSD 버전 10.2 이후로 GENERIC 커널 구성에 기본으로 포함되어 있다.
The nvd(4) and nvme(4) drivers are included in the GENERIC kernel configuration by default since FreeBSD version 10.2 in 2015.