Low quality sentence examples
ginawa sa mga kinakailangang hugis at laki ng workpiece.
made into Ang workpiece laki, haba,
The workpiece size, length,taas ng maximum workpiece, Haba, lapad
height of maximum workpiece, Length, widthmagsimula mula sa labas ng workpiece, o iangat kapag torch ay wala sa workpiece. .
start from outside of workpiece, or lift up when torch is out of natipon sa ibabaw ng workpiece, ang itaas na rehiyon ng workpiece ay agad
gathered on Alikabok nang lubusan ang workpiece.
Dust the workpiece thoroughly.Ang workpiece clamping lakas ay hindi sapat.
The workpiece clamping force is insufficient.I-save ang labor at maiwasan ang workpiece mula sa pagiging scratched.
Save labor and prevent the workpiece from being scratched.Kapag binabago ang direksyon, i-on ang workpiece, hindi ang lagari.
When changing direction, turn the workpiece, not the saw.Hindi nila maaaring mawala ang tela nang mabilis nang hawakan ang workpiece.
They can not slip out of the fabric so quickly when handling the workpiece.Ang sukat na error sa workpiece ay masyadong malaki na pinuputol ng kamay.
Dimension error of workpiece is too large which is cut by hand.Software na-proseso ang workpiece pagguhit ng direkta na-edit sa pamamagitan ng Auto CAD.
Software can process workpiece drawing directly which edited by Auto CAD.Sa sandaling ang workpiece ay handa na, idagdag ang mga itlog at asukal.
Once the workpiece is ready, add the eggs and sugar.( 2) laser cutting ulo ay hindi makipag-ugnay sa ibabaw materyal, huwag scratch ang workpiece.
(2) laser cutting head does not contact with the material surface, do not scratch the workpiece.Sa kabilang banda, hawakan ang workpiece at gabayan ito sa nais na direksyon.
With the other hand, hold the workpiece and guide it in the desired direction.Palaging pindutin ang workpiece flat sa saw talahanayan na may parehong(!) Mga kamay.
Always press the workpiece flat on the saw table with both(!) Hands.Ang Netherlands DELEM E21 NC system ay maaaring mag-imbak ng 24 programa sa workpiece.
The Netherlands DELEM E21 NC system can store 24 workpiece programs.Kung wala ang machining center magpaandar buhat sa malayo system, ang workpiece ay hindi maasikaso.
Without the CNC machining center of the servo system, the workpiece cannot be machined.( 2) Ang laser cutting head ay hindi nakikipag-ugnay sa ibabaw ng materyal at hindi scratch ang workpiece.
(2) The laser cutting head does not come into contact with the surface of the material and does not scratch the workpiece.Kung ang antas ay antas na at ang workpiece ay walang wobbling, maaari kang magpatuloy sa hakbang 2.
If the base is already level and the workpiece is free of wobbling, you can proceed to step 2.
