Примеры использования A vertical line на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
by drawing a vertical line anywhere inside the chart
If the valve is installed horizontally into a vertical line, this may result in regulating inaccuracies
leaders attached to a vertical line suspended from a buoy at the surface with a weight which is used to hold the hooks near the bottom.
The source is a vertical line array(VLA) of up to 18 source projectors suspended below the vessel.
Actual torso angle" means the angle measured between a vertical line through the"H" point
Design torso angle" means the angle measures between a vertical line through the"R" point and the torso line
The projection of the rod's world sheet onto the x axis yields the foreshortened length OC.(not illustrated) Drawing a vertical line through A so that it intersects the x' axis demonstrates that,
Design torso angle" means the angle measures between a vertical line through the"R" point
the rigid horizontal platform, so that the longitudinal centre line of the pendulum arm falls within 1° of a vertical line at impact.
6-7 cm on the freedom of fit and slide through a vertical line.
Design torso angle" means the angle measured between a vertical line through the manikin H-point and the torso line
During step 8.1 a vertical line should be programmed behind“FL“. Step no.:
the vertebral body are arranged on a vertical line, the joint facet of the prezygapophysis
Actual torso angle" means the angle measured between a vertical line through the Hpoint and the torso line using the back angle quadrant on the H-point machine.
Design torso angle" means the angle measured between a vertical line through the Rpoint and the torso line in a position which corresponds to the design position of the seat back established by the vehicle manufacturer.
Design torso angle" means the angle measured between a vertical line through the"R" point
Design torso angle" means the angle measured between a vertical line through the"R" point
declined relative to 1995 contributions which are standardized to equal 100 and shown as a vertical line in the figure.
through the inner edge of the blade spend a vertical line, then lead them along the spine,
Actual torso angle" means the angle measured between a vertical line through the H point