Примеры использования Electrical circuit на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
The sensor wire is connected to an electrical circuit from which, after calibration, a pressure reading may be taken.
These issues arise due to unintentional differences in potential in the electrical circuit between the sensor and evaluation unit.
Coupling system for charging the RESS" means the electrical circuit installed in the vehicle used for charging the RESS.
power meter indicating device varmeters and additional electrical circuit device and its case- 1,5 kV;
Conductivity float switches rely on the conducting properties of liquids to complete an electrical circuit between electrodes, or between an electrode
The range of the electrical circuit to be measured is clarified in advance, using electrical circuit diagrams.
The reaction is balanced and the electrical circuit is completed by the flow of ions from the reference solution to the solution under test.
your task- to prevent it happen, breaking the electrical circuit.
with a rated residual operating current not exceeding 30 mA in the electrical circuit of your bathroom.
Coupling system for charging the rechargeable energy storage system(RESS)" means the electrical circuit used for charging the RESS from an external electric power supply including the vehicle inlet.
If the high voltage buses are galvanically isolated from each other, isolation resistance shall be measured for each electrical circuit.
When an electrical circuit is created, these materials react with sulfuric acid during charging
A multidrop bus(MDB) is a computer bus in which all components are connected to the electrical circuit.
If the electrical circuit is divided by galvanic isolation,
to a frequency of pulses within the electrical circuit.
Coupling system for charging the REESS" means the electrical circuit installed in the vehicle used for charging the REESS.
Since the magnetosphere of Jupiter is filled with highly conductive plasma, the electrical circuit is closed through it.
you need to solder in special components to electrical circuit of the motherboard(eg transistors with active resistance).
Simulation techniques with simplified electrical circuit equivalents of oscillation systems of primary transducers are utilized for studying metrological characteristics of the sensors.
also increases the resistance in the electrical circuit of the device.