Примеры использования Maximum thickness на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
The system creates a maximum thickness of 3 mm. The very low profile allows to create couplings between various types of existing flooring and DI-CLASS.
The medial leaflet had several calcifications in the section located in the leaflet dome and base, maximum thickness being 1.68 mm.
Analysis of Fig. 6 shows that the design does not exceed the material's yield point even when PCBs have maximum thickness.
With a maximum thickness of 3mm and its short application time, it is ideal
With a maximum thickness of 3mm and a short application time, it is ideal
a Sprung structure keeps the insulation much closer to its maximum thickness for maximum performance and comfort.
optical part diameter- about 6 mm, optical part maximum thickness- 0.8 mm,
Maximum thickness: 6.5 mm R 42g/ mm².
Its hull consisted of welded steel with a maximum thickness of 50 mm.
The maximum thickness of snow was measured on 9 February 1953, at 115 cm of snow.
Its maximum thickness is observed in the Minor Caucasus area,
Rolling of steel sheets with maximum thickness of 25mm for carbon steel,
Cylinder/crankcase joint: the maximum thickness of any gasket between the base of the cylinder and the crankcase shall
mean thickness 25-75 m, maximum thickness 150 m; groundwater flow direction from Belarus to Ukraine;
In general, the workpiece must be at least 10 mm(0.4 in) thick, while the maximum thickness for one electrode is approximately 20 mm 0.8 in.
designed for making coatings with a maximum thickness of 30 mm.
Sheets, maximum thickness 305 µm(12 mil) per sheet When loading photo sticker paper, only load a single sheet at a time Output tray: 100 sheets.
Furthermore the line has been designed for 1,370 mm width and a maximum thickness of 5.0 mm with the possibility of processing up to 30 cuts.
What is the maximum thickness of DI-CLASS?
Maximum thickness of material is 2,25mm