Примеры использования The subnet на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
The Subnets tab contains the following elements.
On the Subnets tab, select the specific subnet to be deleted from the displayed list of subnets. .
If so, configure those distribution points as protected distribution points and indicate the subnets that should access the distribution point.
clear the Search local subnets check box on the Subnets tab.
Use the Subnets tab of the Configuration Manager 2007 Network Discovery Properties dialog box to specify the subnets for Configuration Manager to search during discovery.
add the IPv6 addresses of the DHCPv6 servers that are configured with IPv6 address scopes for the subnets to which the RRAS server is connected.
more unicast address prefixes among the subnets of an organization network.
If one or more subnets are displayed on the Subnets tab of the Network Discovery Properties dialog box,
This planning worksheet is used to identify the number of sites you require to manage the computers in your organization, the subnets or ActiveDirectory sites associated with those sites,
a Windows Installer source list update cycle will not be triggered if one of the subnets remains the same.
Subnet Mask Enter the subnet mask of the STB's IP address.
In the above example the subnet mask consists of 26 bits,
If none of the interface is not the subnet that contains the IP jail will be selected by default interface.
The Subnet mask parameter denotes the subnet mask for the IP address specified.
Specifies the subnet mask that corresponds to the network IP address.
These addresses form the subnet object names when you create subnets.
If Network Discovery has discovered resources in the subnet, it cannot be deleted.
Specifies whether DHCP messages are relayed from DHCP clients on the subnet to which this interface is attached.