Примери за използване на Cross-sectional area на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
If you are using angular or rectangular profile, cross-sectional area should not be less than 150 square millimeters When using steel pipes minimum wall thickness- 3.5 mm diameter- 32 mm.
does not become compressed, the cross-sectional area of the stream-tube must expand to accommodate the slower moving air(Figure 1).
their size and cross-sectional area, as well as the minimum number of poles for erecting the foundation.
which should not exceed 15 cm, the cross-sectional area gives only a small amount of loss
we can assume that for one square meter cellar area of 26 square centimeters required cross-sectional area of the ventilation duct.
which should not exceed 15 cm, the cross-sectional area gives only a small amount of loss and attenuation of the signal.
the diameter of the chimney is recommended to be calculated from the calculation of the minimum cross-sectional area, namely 5.5 cm2 per 1 kW.
A large cross-sectional area of the collector tubes.
It is recorded on too small a cross-sectional area.
So let's call this cross-sectional area A.
Length"L" and cross-sectional area"A".
So let's call this cross-sectional area A.
A{\displaystyle A} is the cross-sectional area of the specimen.
The diameter or cross-sectional area of the electrodes must comply with Buyeo.
The relative narrowing of the cross-sectional area,%- not less than 35;
The bigger objects present a larger cross-sectional area, so they're easier to hit.
for her need to pipe the next channel cross-sectional area.
Also, a larger cross-sectional area makes for less opposition,
In the secondary, the cross-sectional area should be about 30 mm², not taking into account the insulation.
For solar tubes this is defined as the cross-sectional area of the inner tube(selective coated)