Примери за използване на Grain size на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
average grain size with yellow skin
then it is performed on a grindstone with a grain size not lower than 6000.
average grain size with yellow skin
Rough-grinded: surface with rough traces of grinding achieved by grinding tools up to a grain size of 60.
Finely-grinded: surface with fine traces of grinding achieved by a grinding tool up to a grain size of 220.
When conducting research, it was found that with a decrease in the grain size of the carbide phase,
Ideally, to control grain size, finish hot working operations should be performed at the lower end of the temperature range.
Further, a target having a smaller difference in grain size can sputter a film having a more uniform thickness.
The grain size will depend on the thickness of the material layer to be removed and the desired purity of the base.
Because grain number and grain size are the two determinants of yield these effects can have serious impacts on wheat yield.
Many traditional alloys were developed to increase the strength of a material by reducing grain size,” says John Curry,
Often in many product forms, the grain size and carbon content can meet both the 347S.
Many traditional alloys were developed to increase the strength of a material by reducing grain size," says John Curry,
Easily and quickly soluble due to fine grain size and using pure single components.
Tolerance: The grain size of the ASTM F6 titanium Bar(Rod)can reach more than h 6 also, the straightness of the.
change grain size of the metals/alloy, promote new bonds between metal atoms, etc.
other materials with grain size below 3mm.
If the cover layer is permeable to water, then a grain size which is permeable to water is also necessary for the base layer.
The hardness of these plates is determined based on their percentage and the grain size of the carbide phase.
Fine particles in the concrete is the amount of solid materials in the concrete mixture, with a grain size less than or equal to 0.125 mm.