The density ofthe EPS Block can reach 6~40kg/m3, with fast EPS Block forming speed, uniform bonding, low moisture content, and with very minor deformation.
Because the filter material is folded into a cylinder, the density ofthe filter material is high, so the structure of the dust collector is compact and the volume is small.
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, copper, and nickel, but the specific strength is at the top of the metal.
The density of titanium metal is 4.51g/ cm3, higher than that of aluminum and lower than that of steel, copper and nickel, but the specific strength lies at the top of metal.
Since density is given by mass/volume and a black hole's mass is proportional to the Schwarzschild radius, the density of black holes is inversely proportional to the square of the Schwarzschild radius.
Visual[/ red] When born, the child;s vision 60 times less than adults due to the structure of the eye is not yet complete, the density of cells in the retina are still low.
Density of output screen dots and solid is high enough for printing down, operations are similar to laser phototypesetting film in the course of printing down.
Its density of industrial robot use is about 100 units per 10,000 workers, which is above the national average but still lags behind world's developed countries.
You know that the computer registry is the most used part of your PC; because of the density of use, this segment of your computer machine becomes vulnerable to wear.
This process method, although the sintering temperature is reduced, but the density ofthe obtained sintered ingot generally reach 90% of the theoretical density, the alloy is some pores, which is currently prepared by powder metallurgy alloys are one of the problems.
The density of Wi-Fi nodes determines location granularity, Hartley explains, but typically, companies like to track workers within a given zone, with a less dense Wi-Fi node installation, rather than spend the money necessary to create highly granular location capability.
The density of rigid polyurethane is 60kg/m³-80kg/m³, fully fill in the gap of Inner plastics pipe and outer HDPE protection layer, with sufficient bonding strength, to make this three layers: Inner Plastics pipe, Polyurethane foaming Layer, Outer protection HDPE layer integral, its property much better than the normal PO pipe.
The site investigation showed that accreted snow/ice under the vehicle floor builds rapidly when the daily average temperature is -4 oC or below and the daily snowfall exceeds 3 cm(Fig.1), the density of a mass of accreted snow/ice under the floor is 150 to 900 kg/m3 and the maximum weight of snow/ice that may drop as a mass is about 15 kg Fig.
English
中文
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt