The program shows everything: the graphics card temperature sensors, current frequency, voltage, fan speed, the number of frames per second, CPU utilization, the use of video.
Introduction The MAX1452 is a high-performance, low-cost signal conditioner with on-chip flash memory, an on-chip temperature sensor, and a fully analog signal path.
MAX6681±1°C Fail-Safe Remote/Local Temperature Sensors with SMBus Interface- Maxim Description Create a design and simulate using EE-Sim® tools: The MAX6680/MAX6681 are precise, two-channel digital thermometers.
The kit features the MachXO2-1200ZE device, a 7-segment LCD display, I2C temperature sensor and an expansion header for I2C, JTAG, and GPIO interfacing.
The one-body type with a temperature sensor is used in many cases. The internal thermocouple can be replaced. For high temperatures of 1,000℃ or higher, a ceramic protection tube is used.
MAX6577 SOT Temperature Sensors with Period/Frequency Output- Maxim Description Create a design and simulate using EE-Sim® tools: The MAX6576/MAX6577 are low-cost, low-current temperature sensors with a single-wire output.
Adopted with temperature compensation system, decorate a temperature sensor in each axis, as well as in the work-piece and measurement space layout has a temperature sensor, acquisition of real-time measuring process by temperature compensation.
The data recorder stores the test data that is either supplied by strain gauges, pressure transducers, current, voltage, acceleration, and temperature sensors or taken from the CAN bus directly in the device.
TDK's complete range of sensors, marketed under the product brands TDK, EPCOS, InvenSense, Micronas and Tronics includes temperature sensors, pressure sensors, angle sensors, current sensors..
Various integrated sensor signal converter circuits allow connection of LEVIFLOW® single-use and clamp-on flow sensors, and single-use pressure and temperature sensors from suppliers such as PendoTECH.
Support for external oil cooler installation ergal with holes for specific oil pressure and temperature sensors for all suzuki motors 1300 and 1600 is 8 that 16v.
The temperature sensor and the current-sense monitor each include a comparator output that indicates that a fault has occurred i.e., the temperature or the current exceeded a specific limit.
Open pins are pulled out, so you can add some components like temperature sensor or brightness sensor and modify IRKit's firmware, write it into IRKit using Arduino IDE to make it more smart.
It incorporates four 16-bit delta-sigma DACs(D-A converters), a temperature sensor, and temperature-indexed coefficient tables for performing temperature compensation and linearization of bridge sensors Figure 4.
To further compensate the fluid and ambient temperature,the temperature sensor is also built into the switch to allow stable measurement within the operating temperature range.
The integrated data memory stores the calibration data of the temperature sensor which is automatically applied when the sensor is mounted to the instrument.
MAX6654 1°C Accurate Remote/Local Temperature Sensor with SMBus Serial Interface- Maxim Description Create a design and simulate using EE-Sim® tools: The MAX6654 is a precise digital thermometer that reports the temperature of both a remote P-N junction and its own die.
English
中文
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt