英語 での Power-up の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
This power-up allows you to hit your target with the maximum force possible.
When the reference design board receives power and finishes the power-up calibration, the board is in measurement state.
Example Aspects The ECUs of vehicle dynamics systems perform plausibility and function checks after power-up.
But watch out for bananas or fake power-up signs and other obstacles that may lie ahead.
Collect power-up, score points with stunts, and try not to crash!
After power-up, the microcontroller configures the power management device and sensors to their default settings.
When LRCK/ BICK is input again, the PLL locks and normal power-up operation is executed.
And as a last point, there is a bug when we spits out our power-up.
The deserializer then sets the MAX9259's INT output high to power-up all remote devices.
Suitable for vacuum use after organic binder is burned off in initial power-up.
The internal EEPROM can restart the power-up process by selecting the autoretry option, and it can also adjust the gate-drive slew rates.
This time he will make Rockman and Forte's power-up parts. Thomas LightThe foremost person on robotics engineering, he is the father/creator of Rockman.
Shows correct values immediately after power-up because the CARBOCAP® does not need to“learn” its environment like other technologies do.
The Butler Power-Up allows team members to create rules, board and card buttons, and date-based automations with natural language commands. It's like productivity Mad Libs.
Note that the MAX5160 has a power-up reset that sets the wiper position to mid-scale, thereby allowing the two digital pots to synchronize to the same resistance.
The"BIOS" or"system firmware" is the core software used by the hardware; it is most critically invoked during the bootstrap process after power-up.
On a Trello board, enable the Dropbox Power-Up.(You will be prompted to log into your Dropbox account, if not already connected.).
I/O ports default as high-impedance inputs on power-up, so the resistor sets the initial logic level until the GPIO is programmed through its serial interface.
The number of screws will increase by 15. Screw(small) You can get power-up parts made at Light's Research Lab according to the amount of screws you have gathered.
With the Butler Power-Up enabled on your board, simply click the Butler icon in the board menu, then“Edit Power-Up Settings,” and begin giving your board butler things to do.