英語 での Remote unit の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
(iv) MSC-I supplies the new channel information to the remote unit via base station B1D, and specifies a time at which the remote unit is to begin communication with base station B2D;
If more round trip delay information is needed to identify the location of the remote unit, the T-- ADD and the T-- DROP thresholds can modified when a remote unit is in the MDHO state.
It may be advantageous to supply a signal from antenna 336 only when at least one remote unit is located in the hard handoff region.
In the table on the right, deactivate In'All MIDI Inputs' for the MIDI input to which you have connected the MIDI remote unit.
The main controlling panel(PCM) of master unit and remote unit will control their modules and communicate with each other via the data link of the optic modules.
Remote unit 120 is shown as a mobile telephone, remote unit 130 is shown as a portable computer, and remote unit 150 is shown as a fixed location remote unit in a wireless local loop system.
One difficulty with this approach is that MSC-I is unaware of whether the signal from the remote unit is received by base station B2D at a sufficient level to support communication at the time.
It supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit(VE802R) while also granting access to the HDMI display device from the local unit VE802T.
Note that if base station 200 belongs to a first system and base station 205 belongs to a second system, base stations 200 and base station 205 may not be capable of simultaneous communication with remote unit 155.
Depending on the remote unit model, you may also need to connect a MIDI Out on the interface to a MIDI In on the remote unit this is necessary if the remote unit features"feedback devices" such as indicators, motorized faders, etc.
distribution unit 204 at very high data rates More particularly, a remote unit 214 of a first end user 216 is coupled to the processing and distribution unit 204 by the subscriber line 212-1, and a remote unit 218 of a second end user 220 is coupled to the processing, and distribution unit 204 by the subscriber line 212-n.
The remote units 214 and 218 include a data communications system capable of transmitting data to and receiving data from the processing and distribution unit 204.
The Local and Remote units are pre-paired with each other through MAC address- no pairing action required during installation.
The set of signals transmitted over antenna 336 may solely comprise the traffic channel signals for the remote units in the hard handoff region and a pilot signal.
The central office 202 services a plurality of distribution posts to provide data transmission to and from the central office 202 to various remote units In this exemplary embodiment, each of the distribution posts is a processing and distribution unit 204(node).
BBU is baseband processing unit and RRU is radio remote unit.
The reverse link refers to the connection from the remote unit to the base station.
(vi) MSC-II acknowledges to MSC-I the successful transition of the remote unit into the system.
Note that a remote unit located in coverage area 242 matches the parameters given for coverage area 240.
Up to 14 USB devices can be connected to the Remote unit up to 100 meters from the computer.