英語 での Soft-start の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The soft-start feature is apparent by the slope on the OPTO pin at startup(Figure 3), and the ramp becomes operational as VOPTO reaches≈2V, as shown in Figure 4 under high load and Figure 5 under low load. Figure 3. Soft-start timing.
Optional features such as programmable switching frequency, synchronization, power-good flag, precision enable, internal soft-start, extendable soft-start, and tracking provide a flexible and easy to use platform for a wide range of applications.
Optional features such as programmable switching frequency, synchronization, power-good flag, precision enable, internal soft-start, extendable soft start, and tracking provide a flexible and easy to use platform for a wide range of applications.
The unique average current control allows for low THD at all load ranges and excellent compensation of line voltage variations. The soft-start and the open-loop-protection provide high reliability and optimum operating conditions for SiC(silicon carbide) diodes.
Each converter features an enable pin that allows a delayed start-up for sequencing purposes, soft-start pin that allows adjustable soft-start time by choosing the soft-start capacitor, and a current limit(RLIMx) pin that enables the designer to adjust current limit by selecting an external resistor and optimize the choice of inductor.
Soft-start circuit, limiting AC surge current.
Fully integrated soft-start for minimum start-up stress.
Other features include soft-start, overcurrent, and overtemperature protections.
Response time: 1 cycle or less(When soft-start is not used).
Soft-start capacitor C14 slowly increases the peak primary current in the power transformer.
The devices feature soft-start to reduce inrush current, output short-circuit protection, and thermal shutdown.
The EV kit demonstrates the IC's cycle-by-cycle current limit, soft-start, and UVLO features.
The device features a programmable output soft-start rate, output over-current and thermal overload protection.
The soft-start is monotonic and well-suited for powering many different types of processors and ASICs.
The device features include programmable soft-start, overcurrent protection with automatic retry and programmable oscillator frequency.
Programmable soft-start time and delay before soft-start. .
The soft-start gate cycles are based on a percentage of the most recent lamp duty cycle.
Additional features include internal soft-start, circuitry to reduce inrush current, pulse-by-pulse current limit, and thermal shutdown.
A slew-rate controller allows controlled transitions between VID codes, controlled soft-start and shutdown, and controlled exit from suspend.
All devices have internal soft-start and short-circuit protection to prevent excessive switching current during startup and under output fault conditions.