英語 での Withstand voltage の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
(8)Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not.
Equipment damage by lightning is almost always due to inrush current caused by withstand voltage damage.
Lightning impulse withstand voltage(peak) between phases and to ground/gap.
Ultra-small coreless current sensor CQ-330x is a coreless current sensor with withstand voltage 3kV while being very small.
Equipment withstand voltage damage.
In addition, adjusting the combination of withstand voltage improver and additives enabled electrolyte withstand voltage characteristics of 800V.
If the applied voltage is inordinately higher than the withstand voltage value, there is a danger of withstand voltage damage.
Product under development Type JHC, new case size that improved withstand voltage was developed.
The electrical frequency withstand voltage is high in discharging gap, high reliability, low allocated voltage, minimum aging phenomenon.
The diode withstand voltage is calculated from the voltage Vdr applied to D5.
In this case, assure a sufficient withstand voltage for the capacitor.
Silicone Hose mainly used in heater systems, cooling system, has excellent high and low temperature resistance, withstand voltage.
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture, no flashover;U≥3000V.
HZAQ-YS electric insulated liveline rope tester product description Electric insulated rope test bracket dedicated to the insulation rope test power frequency withstand voltage test, stent insulation strength and stability of the structure easy to operate, can greatly improve….
We announced GaN-PSJ FET with withstand voltage of over 10 kV and GaN-PSJ Schottky Barrier Diode at over 8 kV at the 65 th JSAP Spring Meeting.
Withstand voltage Between the grounding device and the box body, the withstand voltage is over 3000V/Min, no breakdown and flashover, U≥3000V(direct current).
No abnormalities were observed in the 10-minute 42kV AC withstand voltage test or the 150kV lightning impulse test prescribed by JIS, demonstrating that there are no problems with electrical insulation.
In addition to explaining the characteristics of C0G MLCCs with high withstand voltage, this section focuses on the advantages of replacing the film capacitors used in EV wireless power transfer systems.
TDK has developed high voltage MLCCs with C0G characteristics. Through C0G characteristics, these MLCCs achieve a withstand voltage of 1000V at the broadest capacitance range(1nF to 33nF) in the industry.
The cause of reduction in capacitor's withstand voltage is considered to be hydrogen ion produced in the polymerization, which attacks oxide film on the surface of anode foil.