Unlike active exoskeletons, the passive exoskeleton has no power sources, servomotors, electronics and various sensors.
此外由于很多外骨骼结构使用高扭矩伺服电机为运动提供足够的力量,充足的动力源是至关重要的。
Additionally, because many exoskeletons utilize high-torque servo motors to provide sufficient force for movements, a large power source is vital.
如果是伺服电机和步进电机,电压可能不是很标准,所以很难判断。
If it is a servo motor or stepper motor, the voltage may not be very standard, so it is difficult to judge.
水平行程、垂直行程和旋转运动均可通过单独的伺服电机独立控制。
Horizontal stroke, vertical stroke and rotary movement can be controlled independently of one another via individual servomotors.
这些机器由高速伺服电机进行数字控制,精度高,运行速度更快,能效更高。
These machines are digitally controlled by high speed servo motors, have high precision, are faster and highly energy efficient in operations.
伺服电机期望每20毫秒(ms)看到一个脉冲,脉冲的长度将决定电机旋转多远。
The servo motor expects to see a pulse every 20 milliseconds(ms) and the length of the pulse will determine how far the motor turns.
对于较大的系统,强大的电机占系统成本的比例越来越大,伺服电机具有优势。
With larger systems, where a powerful motor represents an increasing proportion of the system cost, servomotors have the advantage.
在有控制信号时,伺服电机就转动,且转速大小正比于控制电压的大小。
When there is a control signal, the servo motor rotates, and the speed is proportional to the magnitude of the control voltage.
同时,在食品和饮料行业,伺服电机和驱动器在产品精确包装时起着至关重要的作用。
Moreover, in food& beverages industry, servo motors and drives are playing a vital role to make accurate packages of foods or cold drinks.
合并的伺服块,现在引脚8,7和4可用于标准和CR伺服电机。
Merged servo blocks, now pins 8, 7 and 4 can be used for standard and CR servomotors.
伺服电机-这种类型的电机基本上是有刷直流电机,其某种形式的位置反馈控制连接到转子轴。
Servo Motor- This type of motor is basically a brushed DC motor with some form of positional feedback control connected to the rotor shaft.
激光发生器、激光切割头、伺服电机、导轨、水箱等,要分清楚是国产的还是国外的。
Laser generators, laser cutting heads, servo motors, guide rails, water tanks, etc., must be clearly defined as domestic or foreign.
它能产生高频脉冲驱动步进电机和伺服电机,控制2个轴的电机运动,实现直线和圆弧插补。
It can produce high-frequency pulse-driven stepper motor and servo motor, control the motor movement of the two axes, to achieve straight and circular interpolation.
其中,伺服电机对进口的依赖程度尤为严重,这极大的制约了我国机器人产业的发展。
Among them, the dependence of servo motors on imports is particularly serious, which greatly restricts the development of China's robot industry.
这样,系统将知道有多少脉冲被发送到伺服电机,同时又有多少脉冲被接收回来。
In this way, the system knows how many pulses are sent to the servo motor, and how many pulses are received at the same time.
控制系统、伺服电机、减速器是工业机器人的三大关键部件,却长期依赖进口。
Control systems, servo motors, and speed reducers are the three key components of industrial robots, but they have long depended on imports.
作为机器人核心零部件之一,伺服电机市场也打开了新世界的大门。
As one of the core components of the robot, the servo motor market has also opened the door to the new world.
在直流伺服电机和驱动器市场上,这三个细分市场有望吸引市场上的目标客户。
In the DC servo motors and drives market, all the three sub-segments are expected to attract the target customers in the market.
伺服电机有很小的启动频率,能很快从最低转速加速到额定转速。
Servo motor has a small start-up frequency, can be very fast from the minimum speed to speed up to the rated speed.
反过来,该工具通过步进电机或伺服电机定位和引导,这复制了由G代码确定的精确运动。
The tool, in turn, is positioned and guided via stepper or servo motors, which replicate exact movements as determined by the G-code.
English
Bahasa indonesia
日本語
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt