冷却时间 - 翻译成英语

• cooldown
• cooling time
• cooling times
• freezing time

在 中文 中使用 冷却时间 的示例及其翻译为 英语

在注射生产中，塑料注塑加工件冷却时间约占整个注射生产周期的80%。
In the injection production, the plastic injection moulding process cooling time accounts for about 80% of the entire injection production cycle.

如果增加冷却时间就能恢复的话，其原因可能是光学部件热透镜的作用引起的。
If the cooling time is increased, the reason may be caused by the action of the optical lens of the optical component.

这其中又包含了塑料时间和产品冷却时间，这些时间的控制对产品的质量有着深刻的影响。
It includes injection time and product cooling time, and effective control of these times has a profound impact on production efficiency.

对于热塑料、模具温度高,它将提高表面质量和流量,但它会延长冷却时间和注射周期。
For thermoplastics, a higher mold temperature usually improves surface quality and fluidity, but it will increase the cooling time and injection cycle.

冷却塔冷却方式的室外温度转换点的选择直接关系到系统的冷却时间。
The choice of the outdoor conversion temperature point of the cooling mode of the Air Cooler is directly related to the system cooling time.

经验表明，必须通过选择焊接条件，以确保冷却时间t8/5不超过20秒。
Experience has shown that the welding conditions should be chosen so that the cooling time t 8/ 5 does not exceed 20 seconds.

可以控制如胶水温度、纸张类型和冷却时间等因子。
You can control factors such as glue temperature, paper type, and cooling time.

对于热塑性塑料，较高的模具温度通常会改善表面质量和流动性，但会延长冷却时间和注射周期。
For thermoplastics, a higher mold temperature usually improves surface quality and fluidity, but it will increase the cooling time and injection cycle.

首先是肌肉纤维中水分与肉汁的冻结，主要是指温度、湿度、空气流速和冷却时间等。
The first is the muscle fiber moisture and gravy frozen, mainly refers to the temperature, humidity, air flow and cooling time.

通过同时打印两个模型，你能为每个模型，提供更多冷却时间。
By printing two models at the same time, you can provide more cooling time for each model.

B、短波红外线（即近红外）其特点：具有1-3秒钟升温冷却时间，使加热过程控制更灵活。
Short-wave infrared(ie near-infrared) features: It has 1-3 seconds heating and cooling time, making the heating process control more flexible.

模板热处理操作不当(加热或冷却过快、淬火冷却介质选择不当、冷却温度过低、冷却时间过长等)。
Improper heat treatment(heating or cooling too fast, improper selection of quenching cooling medium, low cooling temperature, too long cooling time, etc.).

虽然辅助武器附属于冷却时间，但我无法计算使用它们多少次使我免于死亡。
Although secondary weapons are attached to cooldowns, I can't count how many times using them saved me from death.

七至十分钟冷却时间将让您享受的味道和茶的休闲杯的情感利益.
Seven to ten minutes of cooling time will allow you to enjoy the taste and the emotional benefits of a relaxing cup of tea.

这样液氮自身的升华速度会受到抑制，从而延长冷却时间。
In this way, the sublimation speed of the dry ice itself is suppressed, thereby extending the cooling time.

安吉丽娜可以使用回合制战斗，她有六次攻击，大部分都有冷却时间。
Angelina can use turn-based combat, she has six attacks most of them have cooldowns.

冷却塔冷却方式的室外温度转换点的选择直接关系到系统的冷却时间。
The choice of outdoor switching temperature point of cooling tower cooling mode is directly related to the system cooling hours.

即塑料制品厚度加倍，冷却时间增加4倍。
That is, if the thickness of the plastic product doubles, the cooling time will increase by 4 times..

锂电池只需充电1到2个小时即可，并且不需要冷却时间。
Lithium-ion batteries, on the other hand, only take 1 to 2 hours to charge and do not require a cooling down period.

即塑料制品厚度加倍，冷却时间增加4倍。
That is, the thickness of plastic products is doubled, and the cooling time is increased by 4 times..