加工时间 - 翻译成英语

• processing time
• machining time
• the non-parole period

在 中文 中使用 加工时间 的示例及其翻译为 英语

高速、高效、高精度、高可靠性：要提高加工效率，首先必须提高切削和进给速度，同时，还要缩短加工时间;
Speed, high efficiency, high precision, high reliability: to improve processing efficiency, we must increase the cutting speed and feed, while also reducing the processing time;

其次，STEP-NC数控系统还可大大减少加工图纸（约75%）、加工程序编制时间（约35%）和加工时间（约50%）。
Secondly, STEP-NC CNC system also can greatly reduce the manufacturing drawings( approximately 75%), processing program development time( approximately 35%) and processing time( approximately 50%).

其次，STEP-NC数控系统还可大大减少加工图纸（约75％）、加工程序编制时间（约35％）和加工时间（约50％）。
Secondly, the STEP-NC CNC system can also greatly reduce the processing drawings(about 75%), machining programming time(about 35%) and processing time(about 50%).

其次，STEP-NC数控系统还可大大减少加工图纸（约75％）、加工程序编制时间（约35％）和加工时间（约50％）。
Secondly, the STEP-NC CNC system can also greatly reduce the processing drawings(about 75%), machining programming time(about 35%) and processing time(about 50%).

他称该组合为“改变游戏规则的产品”，可用于世界各地富含矿物质的盐水，从而提高锂产量并大大减少加工时间。
He called the combination a“game changer” that could be applied to mineral-rich brines around the world, improving lithium yields and dramatically reducing processing times.

较快的加工时间.
They have faster processing time.

减少总加工时间。
Reducing the overall processing time.

缩短了30%的加工时间.
Reduced processing time.

应如何分配加工时间？?
How one should distribute preparation time?

更短的加工时间，更低的成本.
Shorter processing time and lower costs.

并将加工时间缩短了近一半。
It reduces treatment time by almost half.

缩短加工时间和维持加工数控技术.
Control Technology for Shorter Machining Times.

塑料可以一次加工成型，加工时间短，精度有保证；.
Plastic can be processed at one time, processing time is short, accuracy is guaranteed.

每道工序的加工时间与每道工序的工位数比例一致。
The processing time of each process is the same as the proportion of the number of workplaces in each process.

这将要求更多的加工时间和步骤，从而减少了总产量。
This will require more processing time and steps, thereby reducing overall production.".

每道工序的加工时间同各道工序的工作地数量比例相一致。
The processing time of each process is the same as the proportion of the number of workplaces in each process.

若工艺参数按最佳设置，可使加工时间短，刀具寿命更长。
If the process parameters are optimally set, the machining time is short and the tool life is longer.

总的构建和加工时间，包括支撑移除、打磨、上漆等为20天。
Total build and processing time including support removal, sanding, painting, etc. was 20 days.

通常假定组装生产线的节拍一定，并且所有工作站的加工时间基本相等。
It is generally assumed that the beat of the assembly line is constant and the processing time of all workstations is substantially equal.

它需要在高温下持续很长的加工时间，而这又往往会导致热降解。
It requires a high temperature for a long processing time, which often causes thermal degradation.