塑料助剂 - 翻译成英语

• plastic additives
• of plastic auxiliaries

在 中文 中使用 塑料助剂 的示例及其翻译为 英语

塑料助剂与聚合物的相容性主要取决于它们的结构相似性。
The compatibility of plastic auxiliaries with polymers depends primarily on their structural similarities.

制造塑料制品时，不必再加入该种塑料助剂，而只需加入相应的母料即可。
When manufacturing the plastic product, it is not necessary to add the plastic auxiliary agent, but only the corresponding master batch can be added.

因此，应该注意塑料助剂与聚合物在稳定性方面的相互影响。
Therefore, attention should be paid to the mutual influence of plastic additives and polymers on stability.

增塑剂是塑料助剂中在数量、产量、消费量中最大的一类助剂。
Plastic additive are plastic auxiliaries in quantity, production, consumption, the largest of a class of additives.

因而，它是当今世界塑料助剂应用的最主要形….
Therefore, it is one of the most important forms of the application of plastic additives in the world today.

塑料助剂与聚合物的相容性.
Compatibility of plastic additives with polymers.

总之，选用的塑料助剂对加工条件应具备适用性。
In short, the selected plastic additives should have applicability to the processing conditions.

总之，选用的塑料助剂对加工条件应具备适用性。
In conclusion, the selected plastic additives should be suitable for processing conditions.

据预测，在未来一段时期内，塑料助剂市场仍将以3%-4%的速度增长。
It is predicted that in the coming period, the plastic additives market will still be 3%-4% growth rate.

塑料助剂析出后即失去塑料助剂的作用，而且影响塑料制品的外观。
Plasticizer loses the role of plastic additives after precipitation, and affects the appearance of plastic products.

据预测，在未来一段时期内，塑料助剂市场仍将以3%-4%的速度增长。
It is predicted that the plastics additives market will continue to grow at a rate of 3%-4% in the coming period.

美国目前是全球的塑料助剂消费国，但在不久的将来预计将被中国超越。
USA is currently the largest plastic additives consumer in the world but is anticipated to be outcaste by China in the near future.

据预测，在未来一段时期内，塑料助剂市场仍将以3%-4%的速度增长。
It is predicted that the plastics additives market will grow at a rate of 3-4% in the future.

同一种聚合物，由于加工成型的方法不同，所需要的塑料助剂也可能不同。
The same polymer, due to different processing methods, may require different plastic additives.

同一种聚合物，由于加工成型的方法不同，所需要的塑料助剂也可能不同。
The same polymer, due to different processing methods, the required plastic additives may also be different.

环氧大豆油作为无毒、增塑、稳定的塑料助剂，引起塑料加工行业以及增塑剂生产企业的高度关注。
Epoxy soybean oil as non-toxic, plasticized, stable plastic additives, will increasingly cause plastic processing industry and plasticizer production enterprises of high concern.

不同聚合物的加工条件不同，同一种聚合物，由于加工成型的方法不同，所需要的塑料助剂也可能不同。
Different polymer processing conditions are different; the same polymer, due to different processing methods, the required plastic additives may also be different.

从2005年起始，中国塑料助剂行业年均增长率保持在8百分之百-10百分之百的水准，远远高于世界塑料助剂4百分之百的年均增长率。
Since 2005, China's plastic additives industry annual growth rate of 8%-10%, far higher than the world's plastic additives 4% annual growth rate.

选用塑料助剂的重要依据是制品的最终用途。
The important basis for choosing plastic additives is the ultimate use of the products.

塑料助剂必须长期稳定地存在于塑料制品中。
Plastic additives must be stably present in plastic products for a long time.