奥氏体不锈钢 - 翻译成英语

• austenitic stainless steel
• austenitic stainless steels

在 中文 中使用 奥氏体不锈钢 的示例及其翻译为 英语

奥氏体不锈钢的特点是相变温度很高，所以可以用作耐热钢。
Austenitic stainless steels are characterized by high phase transition temperatures and can therefore be used as heat resistant steels..

奥氏体不锈钢是这一名单上常见的不锈钢类型之一。
Austenitic stainless steel is one of the most common types of stainless steel on this list.

奥氏体不锈钢系列主要分为两类，300系列和200系列。
Austenitic stainless steels are split into two subcategories: the 300 series and 200 series.

奥氏体不锈钢的特点是相变温度很高，所以可以用作耐热钢。
Austenitic stainless steel is characterized by a high phase change temperature, so can be used as heat-resisting steel..

镍是Incoloy、Inconel和Monel合金系列的主要元素，也是奥氏体不锈钢的添加元素。
Nickel is the backbone of the Incoloy, Inconel and Monel alloy families and is an additive in austenitic stainless steels.

因UNSN08367是奥氏体系不锈钢，所以其热处理符合奥氏体不锈钢的标准。
Because N08926 is an austenitic stainless steel, heat treatment also conforms to that of standard austenitic stainless steels.

(4)综合力学性能好，有较高的强度和疲劳强度，屈服强度是18-8型奥氏体不锈钢的2倍。
The comprehensive mechanical properties are good, with high strength and fatigue strength, and the yield strength is twice that of 18-8 austenitic stainless steel.

为了制造铁素体不锈钢，需要铁和铬，制造奥氏体不锈钢，镍被添加到混合物中。
To make ferritic stainless steels, one needs iron and chromium, and to make austenitic stainless steels, nickel is added to the mixture.

京德勒公司50万吨不锈钢的年产量中，大约有70%为200系，铁素体和奥氏体不锈钢只占30%。
Kindler company 500,000 tons of stainless steel annual output, about 70% is 200 series, ferrite and austenitic stainless steel accounted for only 30%.

奥氏体不锈钢的锻造要比普通钢难，但很少产生表面缺陷。
The forging of austenitic stainless steel is more difficult than that of ordinary steel, but surface defects rarely occur.

防止奥氏体不锈钢应力腐蚀的最主要途径是加入Si2～4％并从冶炼上将N含量控制在0.04％以下。
The main way to prevent stress corrosion of austenitic stainless steel is to add Si2-4% and to control N content below 0.04% from smelting.

Alloy316L是一种奥氏体不锈钢，在热加工和退火后供应。
Alloy 316L is an austenitic stainless steel supplied in the hot worked and annealed condition.

由于奥氏体不锈钢的广泛应用，给人们造成所有不锈钢都没有磁性的错误印象。
Due to the wide application of austenitic stainless steel, people have the false impression that all stainless steels are non-magnetic.

奥氏体不锈钢晶间腐蚀的原因，目前大家公认的是晶界区贫铬的理论。
The reason for the intergranular corrosion of austenitic stainless steel is currently recognized as the theory of chromium deficiency in the grain boundary region.

由于奥氏体不锈钢的广泛应用，给人们造成所有不锈钢都没有磁性的错误印象。
Due to the wide application of austenitic stainless steel, it gives people the wrong impression that all stainless steels are not magnetic.

奥氏体不锈钢的锻造要比普通钢难，但很少产生表面缺陷。
Forging of austenitic stainless steel is more difficult than those of ordinary steels, but it rarely produces surface defects.

N08926为奥氏体不锈钢，热处理可采用与标准奥氏体不锈钢同样的方式。
Because N08926 is an austenitic stainless steel, heat treatment also conforms to that of standard austenitic stainless steels..

应用的普遍性与多面性不如奥氏体不锈钢。
The universality and versatility of the application is not as good as that of austenitic stainless steel.

Cr18Ni9Ti：奥氏体不锈钢，碳含量低于0.06%，一般采用1050C左右固溶处理（即加热水冷），提高抗蚀能力。
Cr18Ni9Ti: austenitic stainless steel, carbon content of less than 0.06%, generally about 1050C solution treatment(ie, heating water), improve the corrosion resistance.

双相不锈钢经过三代的发展和完善，双相不锈钢在某些应用领域已经取代奥氏体不锈钢，无论是在生产、加工、制造还是应用领域。
After three generations of development and improvement, duplex stainless steel has replaced austenitic stainless steel in production, processing, manufacturing and application.