Technetics Group Columbia- Technetics Group Columbia manufactures metal seals for the aerospace and nuclear power industries, and was formerly known as Garlock Helicoflex.
其次,法兰垫圈已被密封环取代,以确保密封件面对密封表面。
Second, the flange gasket has been replaced by the sealing ring to ensure that the seal faces the matching of the sealing surface.
从1858年开始,橡胶被用作食品包装瓶中的静态密封件,但动态密封件仍然趋向于由油浸皮革制成。
Since 1858, rubber has been used as a static seal in food packaging bottles, but dynamic seals still tend to be made of oil-impregnated leather.
这是一个非常有价值的特性,尤其当更换密封件时。
This is a very valuable feature, especially when replacing a seal.
钨的一些其他用途包括金属蒸发工作,制造涂料,制造玻璃-金属密封件并制造电子和电视管。
Some other uses of tungsten include metal evaporation work, the manufacturing of paints, making glass-to-metal seals and creating electron and television tubes.
我们可以为无刷电机微型轴承选择不同的密封件,包括金属屏蔽(zz),橡胶密封件(2rs)。
We can choose the different seals for the brushless motor miniature bearing, including metal shielded(zz), rubber seal(2rs).
该岛是太平洋沿岸最大的并且是家庭对美洲狮,熊,麋鹿,水獭与和密封件沿海岸线生活。
The island is the largest on the Pacific coast and is home to cougars, bear, and elk, with otters and seals living along the shoreline.
在电视上经常看到原油泄漏的新闻,其实那就是密封件没做好,或者密封件的质量不行。
The oil leaked the news often seen on television, in fact, that is the seal is not good, perhaps can not seal quality.
克林格丹麦成立于1848,今天我们供应阀门,液位计,垫片和密封件,为国内6个行业以及全球。
KLINGER DENMARK was founded in 1848 and today we supply valves, instruments, gaskets and seals for 6 domestic industries as well as globally.
尽管只有在这样的高温下才会产生烟雾,但是密封件一旦过热,即使在冷却后拿取也是危险的。
Although smoke is generated only at such high temperatures, once the seal is overheated, it is dangerous to take it even after cooling.
因此应避免与这些金属接触,用纸袋或聚乙烯袋包装密封件以防止此类接触。
Contact with these metals should therefore be avoided and the seals should be covered with layers of paper or polyethylene to prevent such contact.
它包含一个由SKF船舶设计和供应的特制耐海水腐蚀密封件。
It incorporates a special seawater resistant seal, designed and supplied by SKF Marine.
运动方向-先决定密封件所在位置的运动方向,例如往复、旋转、螺旋或固定。
Direction of movement- First determine the direction of movement of the seal, such as reciprocating, rotating, spiraling or fixed.
如果密封件的主要目的是排除污染物,唇口应该朝外,远离轴承(图3)。
If the primary purpose of the seal is to exclude contaminants, the lip should face outward, away from the bearing(fig 3).
English
Bahasa indonesia
日本語
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt