的抗拉强度 - 翻译成英语

• tensile strength
• tensile strengths

在 中文 中使用 的抗拉强度 的示例及其翻译为 英语

但橡胶的抗拉强度比普通橡胶差，不具有耐油性。
However, the tensile strength of rubber is worse than that of ordinary rubber and it has no oil resistance.

不锈钢管的抗拉强度大于530N/mm，延展性好。
The tensile strength of stainless steel pipes is more than 530N/mm, and it has good ductility.

但橡胶的抗拉强度比普通橡胶差，不具有耐油性。
However, the tensile strength is inferior to that of ordinary rubber and does not have oil resistance.

不锈钢水管的抗拉强度大于530N/mm，延伸性好。
The tensile strength of stainless steel pipes is more than 530N/mm, and it has good ductility.

纯铝的抗拉强度约为80MN/m2，是低碳钢的五分之一。
The tensile strength of pure aluminum is about 80 MN/m2, is one 5 of the low carbon steel.

在水泥中，钢丝网可以扩大和收缩，可以在水泥中使用，从而提高水泥的抗拉强度。
In cement, Stainless steel wire mesh can be stretched and used, and can be used for cement, which improves the tensile strength of the cement.

含镍量达5%可提高低碳结构钢的抗拉强度和硬度。
Containing nickel amounted to 5% can increase the tensile strength and hardness of low carbon structural steel.

高强度链有良好的抗拉强度，比普通链条的抗拉强度高15%到30%，并具有良好的抗冲击能力和抗疲劳性。
High-strength chains have good tensile strength, 15% to 30% higher tensile strength than ordinary chains, and have good impact resistance and fatigue resistance.

专家小组检查的材料抗拉强度为4900兆帕，弹性模量为230千兆帕，这显然达到了第1929(2010)号决议所提到的管制门槛值。
The material inspected by the Panel has a tensile strength of 4,900 MPa, and modulus of 230 GPa, which clearly falls above the control thresholds cited in resolution 1929(2010).

各种材料的抗拉强度.
Resisitivity of Various Materials.

光纤连接器的抗拉强度大于90N；.
Fiber optic connector tensile strength greater than 90N;

PLA具有最良好的抗拉强度和延展度。
(6) PLA has the best tensile strength and ductility.

怎样使材料有足够的抗拉强度和屈服强度。
How to make the material have sufficient tensile strength and yield strength;.

时，吸附水全部析出，纤维的抗拉强度约降低20%;
The adsorption of water all precipitation, fiber tensile strength reduced by about 20%;

C．如何使材料有足够的抗拉强度和屈服强度；.
How to make the material have sufficient tensile strength and yield strength;.

在某些情况下，某些板的抗拉强度和重量减少了80％以上。
In some cases, tensile strength and weight of some boards decreased by more than 80 per cent.

高强铝合金的抗拉强度大于480MPa，能完全满足高速列车车厢强度标准。
High-strength aluminum alloy tensile strength greater than 480 MPa, fully meet the intensity of high-speed rail train car standards.

强度水平：如ASTM标准的A420GradeC的抗拉强度在515Mpa至655Mpa之间.
Required strength level, for example steel grade A240 Grade C specified in ASTM standards has the tensile stress value between 515 and 655 MPa.

但是，聚合物的抗拉强度弱于钢和铝，且较容易受意外损伤。
However, they offer less tensile strength than steel or aluminium and are potentially more susceptible to accidental damage.

超好的抗拉强度和粘接强度：因此可以应用于许多重型的包装.
Excellent tensile Strength and Welding Strength: Thus it is used for many heavy packages.