영어에서 Stepper motors 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Hybrid Stepper Motors 86HSD Series 1.8 degree step angle 86mm*86mm square size for computerized embroidery machine.
Hybrid Stepper Motors 60HSD Series 1.8 degree step angle 60mm*60mm square size for Medical Equipment.
PAD planetary gearbox can be used with different brands of servo motors and stepper motors like Panasonic, Mitsubishi, Yaskawa, Taida, Fuji, etc.
Hybrid Stepper Motors 86HYD Series 1.8 degree step angle 86mm diameter round size for packing machine.
X MOTION Hybrid Stepper Motors are widely used in laboratory and medical equipment,
In the current domestic digital control system, stepper motors are widely used.
There are several different ways that stepper motors are able to be driven including full step,
Stepper motors may come with four, five, six or eight wires.
Plc Control 35-100 GSM PP Non Woven Bag Making Machine With Two Stepper Motors.
KM and MH172 Series stepper motors provide the highest torque in a wide range of frame sizes.
The Prusa i3 uses, including the extruder, 5 NEMA17 stepper motors.
And you can buy stepper motors that pretty much never wear out because they have no brushes, for a dollar.
On a smaller scale, the 1978 era HP 7225A pen plotter used two linear stepper motors to move the pen along the X and Y axes.
High Performance Stepper Motors These step motor drives offer advanced features such as self-test diagnostics,
miniature motors-- brushless motors, servomotors, stepper motors, that are used in printers and scanners.
Because they exhibit high static and dynamic torque and run at very high step rates, hybrid stepper motors are used in a wide variety of commercial applications including computer disk drives,
Millions of small electronic devices with built-in motor drive mechanism are used everyday around the world, relying on stepper motors to achieve low-cost motion, which can be easily controlled without complex microprocessor-based driver.
Because of the double set of teeth on the central shaft, the hybrid motor has the smallest available step size and so is one of the more popular types of stepper motors.
Most National Instruments stepper motor interfaces do not support 6-Wire stepper motors, although some motors do not require the center taps to be used and can be connected normally as a 4-wire motor. .
already at low speed, their stall torque and the possibility to divide the steps in microsteps, stepper motors can provide direct and precise motions in a small volume.