영어에서 Transmit power 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Available transmit power settings Maximum power setting varies by channel and according to individual country regulations.
For data services, the transmit power needed to support soft handoff may be more efficiently used for transmitting additional data.
All of these iBeacons have varying default settings for their iBeacon advertisement and default transmit power frequency.
The normal link range is 10 cm to 10 meters, but transmit power is optionally increased to provide links of up to 100 meters.
If interference is from other access points, consider reducing AP transmit power so coverage areas do not overlap.
In battery operated STAs, transmit power may be comparable to receive power,
These transmissions may require high transmit power, and in some instances, can only be sustained at low data rates.
channels are used for the unsteered mode, then higher transmit power may be used for each selected spatial channel.
Today Ethernet devices continuously transmit power between devices, even when network traffic is at a standstill.
The external power source 103 can transmit power to the implanted pulse generator 101 using electromagnetic induction(e.g., RF signals).
When using reader transmit power levels of>
An RF amplifier determines the power of the signal to be transmitted by the RFID reader(i.e. its transmit power) and amplifies the RF signal to that desired power level.
Good transmit power control methods can be important to communication systems having many simultaneous transmitters because such methods reduce the mutual interference of such transmitters.
frequency ranges, transmit power levels, and/or other parameters(e.g., Tables 1
channels, sensitivity, transmit power, range and network coverage, so you get optimized AIDC system performance in even the most challenging industrial environment.
Since multiple users share the same tones in this multiplexing scheme, the transmit power for each user can be controlled to efficiently utilize the available resource.
slightly for pulse-Doppler radar performance, which can be used to increase detection range and reduce transmit power.
Underground may be for certain figures stored still very large amount of thermal energy(again, the average lightning transmit power at least several hundred kilowatt hours up to several megawatt-hours), and although under the ground surface remains less than one percent, still causes such a change(thermal), which may be in the infrared spectrum very noticeable.
a“zero” power control bit causes the remote station to increase its transmit power level by 1 dB and a“one” power control bit causes the remote station to decrease its transmit power level by 1 dB.
Digital transmit power controller 328 applies a minimum level of power for purposes of interference reduction and resource allocation,