LEAK-MASTER® MAPMAX는 최첨단 기술로 하나의 패키지 또는 전체 운송포장의 가장 작은 리크도 감지 가능합니다.
With state-of-the-art technology, LEAK-MASTER® MAPMAX ensures the detection of even the smallest of leaks in single modified atmosphere packages or complete shipping cases.
세 가지 다른 기술을 사용하는 리크 테스트 및 CCIT(용기 마개 무결성 테스트)
Using three different technologies, leak testing and CCIT(Container Closure Integrity Testing)
분자의 크기가 비교적 작기 때문에 포장 리크를 통해 빠르게 새어나갈 수 있습니다.
The relatively small molecular size of the gases allows rapid escape through packaging leaks.
LEAK-MASTER MAPMAX는 비교할 수 없는 속도로 분당 최대 15 사이클의 100 % 전수 검사 리크 테스트를 할 수 있습니다.
The LEAK-MASTER MAPMAX as in-line solution allows a 100% leak testing with up to 15 cycles per minute- unrivaled speed.
열풍 히터 용도예 제102호》 102. 물탱크를 이용한 리크 테스트 후의 건조.
Air Blow Heater Applications No.102》 Drying after the leak test using a water tank.
The LEAK-MASTER® EASY 는 리크 검지를 위한 다양한 ASTM (미국재료시험협회) 검사에 사용할 수 있습니다.
The LEAK-MASTER® EASY leak testers can be used for various ASTM-tests for the detection of leaks.
특허를 취득한 센서의 형상이 신호를 증폭하고 최저 5· 10-4 mbar· l/s의 매우 낮은 리크율까지 측정할 수 있습니다.
The patented geometry of the sensor amplifies the signal and allows the measurement of very low leakage rates up to 5· 10-4 mbar· l/s.
라이브 리크, 데일리 모션 및 더 많은.
such as Vimeo, Vine, Vidio, LiveLeak, Dailymotion and many more.
자재 결함, 부적절한 공정 및 조립 등 리크 발생 원인에 따라 간단한 수중 기포 발생 검사부터 다양한 테스트 가스를 사용한 차압 리크 테스트까지 여러 가지 리크 테스트 방법이 사용될 수 있습니다.
Depending on the type of application, various methods can be used to detect leaks that have been caused e.g. by material defects, improper processing or assembly- from simple water dip tests via differential pressure testing to leak tests with various test gases.
제 73 호 스팀 오븐의 과열 수증기의 제조 제 102 호 물탱크를 이용한 리크 테스트 후의 건조 제 64 호 금속 부품 세척 후 건조 제 6 호 할로겐 라인 히터에서 도료의 건조 제 71 호 과열 수증기의 제조 제 68 호 전기 보일러의 건조 수증기의 제조 제 65 호 소형 고온 터널로 열원 제 47 호 올 전화 실험실 가스 대체.
Drying of the surface attached water No.68 Manufacturing of dryness steam of electric boiler No.102 Drying after the leak test using a water tank No.64 Metal Parts Drying after Washing No.6 Dryness of paints No.89 Heating of the gas for evaluation No.71 Manufacturing of superheated steam No.65 Small high-temperature tunnel furnace heat source.
제 34 호 배지 부분 가열-열풍 히터의 용도 예 제 35 호 가열 살균 공기의 제조 제 25 호 경화 유리 플라스틱 강화 접합 제 25 호 프리큐어 실러 도포 후 건조 제 103 호 폴리에틸렌 용기의 성형 제 102 호 물탱크를 이용한 리크 테스트 후의 건조 제 84 호 형상 기억 합금의 시험 제 44 호 배지의 균일 가열.
No.34 Partial heating of the culture medium No.35 Manufacturing of heating sterilization air No.25 Resin reinforcement sticking of the stiffening glass together No.25 Drying after Precure sealer application No.103 Molding of a polyethylene container No.102 Drying after the leak test using a water tank No.84 Study of shape memory alloy No.44 Uniform heating of the medium.
current of a transistor including silicon; 따라서, 트랜지스터(162)의 리크 전류로 인해 플로팅 게이트부(FG)에 축적되는 전하의 소실은 무시할만한 정도이다.
including a silicon semiconductor; thus, lost of the charge accumulated in the floating gate portion FG due to a leakage current of the transistor 162 is negligible.
English
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文