should be connected
must be associated
must be linked
커뮤니케이션 단위는 갱신 도중 컴퓨터 및 차량에 둘 다 연결되어야 합니다.
The Communication Unit must be connected both to a computer and a vehicle during the update.변형기 신호, 그것은의 산출 긍정적인 끝으로 4" 입력 확실성 끝과 연결되어야 합니다.
As the output positive end of the transducer signal, it should be connected with input positive end.현재를 나타내는 전류계는 레이저 관의 부정적인 전극에 연결되어야 합니다.
The ammeter indicating current must be connected to the negative electrode of the laser tube.변형기 신호, 그것은의 산출 부정적인 끝으로 3" 연결되어야 합니다.
As the output negative end of the transducer signal, it should be connected with.Windows Server 2012를 실행하는 컴퓨터는 30일 이내에 활성 KMS 클라이언트 컴퓨터에 연결되어야 합니다.
The computers running Windows Server 2012 must connect within a 30-day period to active KMS client computers.예를 들어 제품을 다루는 핀은 해당 제품을 구매할 수 있는 페이지로 연결되어야 합니다.
For example, Pins that feature a product should link to a page where people can buy that product.선교는 우리 자신들의 지역에 있으며 우리는 교회처럼 우리가 살고있는 지역 공동체와 연결되어야 합니다.”.
Mission is within our own neighborhoods, and we must get connected, as a church, to those communities in which we live as well.”.맨끝 G: 발송인은 이고” OP 철사는 “이 맨끝에 연결되어야 합니다 차단된 상태에서,
Terminal G: Is the sender and wire“OP” should be connected to this terminal- with the wire disconnected,맨끝 워억: 스위치는 이고 *wire “15"는 이 맨끝에 연결되어야 합니다 차단된 상태에서,
Terminal WK: Is the switch and*wire“15” should be connected to this terminal- with the wire disconnected,그것의 RX와 TX 핀은 디지털 방식으로 항구 0과 1에 연결되어야 합니다 각각 다음과 같이.
to connect the module to the Arduino UNO Baseboard, its RX and TX pins should be connected to digital port 0 and 1 respectively as follows.QT 메시지 펌프(이벤트) 루프가 UI 내 메인 이벤트 루프와 연결되어야 합니다.
with the engine and the QT message pump(event) loop must be hooked up with the main event loop in the UI.Adobe Presenter Video Express 2017 릴리스가 설치된 컴퓨터는 일련 번호가 지정된 제품을 최초 실행한 후 30일 이내에 최소 한 번 이상 인터넷에 연결되어야 합니다.
The computer with the 2017 release of Adobe Presenter Video Express installed must connect to the Internet at least once within 30 days of the first launch of your serialized product.IN2: 당신이 이 두번째 릴레이를 사용하는 경우에 두번째 릴레이 (에 핀 Arduino 디지털 방식으로 연결되어야 합니다 통제합니다. 그렇지 않으면, 당신은 그것을 연결할 필요가 없습니다).
IN2: controls the second relay(it should be connected to an Arduino digital pin if you are using this second relay. Otherwise, you don't need to connect it)..선박 리프트의 토크 계측 선박 리셉션 챔버를 동기식으로(전기적 동기화를 포함하여) 원활하고 안전하게 운영하기 위해 네 개의 리프팅 지점에 있는 감속 기어박스의 출력 축들은 기계적인 강성 동기식 시스템을 구성하는 폐쇄 장방형 축 시스템에 연결되어야 합니다.
In order to operate a ship reception chamber synchronously(including electrical synchronization), smoothly and safely, the output shafts of reduction gearboxes at four lifting points should be connected to a closed rectangular shaft system which constitutes mechanical rigid synchronous system.일반 설치에, 대신 LED를 PWM 컨트롤러는 옵토 커플러로 연결되어야합니다.
In a normal installation, instead of LEDs PWM controller optocoupler should be connected.이 두 장치는 동일한 로컬 네트워크에 연결되어야합니다.
Remember that these two devices should be connected to the same local network.두 번째 또는 두 번째에서, 두 연결 되어야 합니다.
In a second or two, the two should be linked up.시각화 결과와 함께 우리는 내면의 힘과 연결되어야합니다.
Along with visualizing results, we have to connect with our inner power.또한 외부 연결 장치로 인해 PC, PS4 및 기타 호스트 장치가 서로 상호 작용하도록 연결되어야합니다.
In addition, due to the external-connected devices, PCs, PS4, and other host devices must be connected to interact with each other.ПУЭ의 6.1.20 항에 따르면, 별도의 제로 보호 선은 그룹 실드로부터 아파트의 소켓에 연결되어야합니다.
According to clause 6.1.20 of ПУЭ, a separate zero protective wire should be connected to the sockets in the apartment from the group shield.
결과: 45,
시각: 0.039
English
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文