LED'EN in English translation

• LED

Examples of using Led'en in Danish and their translations into English

LED'en viser den indstillede rengøringsperiode
The LED displays the set cleaning period

Hvad kan jeg gøre, hvis STATUS LED'en bliver ved med at blinke orange?
What can I do if the STATUS LED keeps flashing in orange?

Dette er normalt. At LED'en er tændt, angiver, at temperatursensoren er aktiveret.
This is normal, the LED is on indicating that the temperature sensor is activated.

Farven på LED'en afhænger oscillator bølgeform.
The colour of the LED depends on the oscillator waveform.

Stikket skal være tilsluttet, for at LED'en er tændt.
The plug has to be connected for the LED to be lit.

Hvis LED'en er slået, er der en jævnstrømsafbrydelse eller kortslutning i kablet.
If the LED is turned off here is a DC interruption or short circuit in the cable.

Dette er normalt. At LED'en er tændt, angiver, at temperatursensoren er aktiveret.
This is normal, the LED is on indicating that the temperature sensor is activated.

Når"TRY" LED'en lyser, betyder det, at du kan prøve
When the"TRY" LED is lit,

LED'en 2 lyser, når støvsugeren er tændt, og sikrer, at ar- bejdsområdet kan oplyses under dårlige lysforhold.
The LED 2 lights up when the vacuum cleaner is switched on and enables the illumination of the work area in poor visibility.

Stort varmeafledningsvaske sidder lige oven på LED'en, der effektivt opretholder højeste udgang i hele 1,5 timers kørselstid.
Large area heat dissipation sink sits right on top of the LED, effectively maintaining the highest output throughout the battery's 1.5 hour runtime.

Charge mode LED'en lyser, mens opladeren fylder batteriet op,
The Charge mode LED shows while the charger is filling the battery,

Dette er normalt. At LED'en er tændt, angiver, at temperatursensoren er aktiveret.
This is normal, the LED is on indicating that the temperature sensor is activated.

LED'en i tasten lyser pads er også hastighed følsomme
The 8 LED illuminated pads are also velocity sensitive

LED'en angiver når pedalen er forlovet eller ej,
The LED will indicate when the pedal is engaged

Når LED'en er hvid,
When the LED is white,

I ved alle at fjernbetjeninger har en infrarød LED-- i bund og grund tænder man LED'en, og hvis den er slukket, slukker man for den.
You all know remote controls have an infrared LED-- basically you switch on the LED, and if it's off, you switch it off.

dette indikeres af LED'en på kontrolboksen.
this is indicated by the LED on the control box.

Når reset er nulstillet, vil forbindelsen med alle enheder gå tabt, og LED'en bliver hvid.
Once reset, the association with all devices will be lost, and the LED will turn white.

ADE-antennen på taget status LED'en blinkede rødt.
the ADE antenna on the roof status LED flashing red.

Blinker Hvis der ikke er noget batteri, eller batterispændingen er for lav, begynder LED'en at blinke for at angive, at enheden er gået over i den strømbesparende tilstand.
Is flashing If no battery or if the battery voltage is too low the led will start to flash to indicate the unit has entered power save mode.