Examples of using Polyurethane foam in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Professional quality, pre-taping polyurethane foam underwrap.
The tip is constructed by 100 PPI Polyurethane foam.
Produced, in this case, by the burning polyurethane foam on the walls.
Have tilt-up and sectional doors prefabricated already provides insulation from polyurethane foam.
(vii) Fire retardant in fabrics, carpets, polyurethane foam, etc.;
Polyurethane foam is a good trap heat indoors in winter and will not allow overheating the attic during the hot summer days.
Due to the water resistance of polyurethane foam and the ability to seal the surface, when it is used there is no need
Polyurethane foam is mainly used for furniture and upholstery in domestic furnishing, automotive and aviation industry.
Polyurethane foam- this produ ct see Addressing two of its constituent polymers, which are usually in liquid form- is polyol and polizotsionat.
Polyurethane foam- it's almost a universal building material, which is an experienced master can find a variety of uses.
Frames are well-padded with a combination of resilient polyurethane foam and dacron which can shift
Pentabromodiphenyl ether commercial mixtures have been used in Norway as a flame retardant in electrical and electronic equipment, polyurethane foam, textiles and means of transportation.
According to POPRC(2006), global emissions of PentaBDE to air during polyurethane foam production in 2000 ranged from 7500 to 13500 kg.
Yellow Pigment 8039 is especially designed for the coloring agent of Polyurethane Foam, which appearance is yellow paste and has slight odour.
PentaBDE has been used in Norway as a flame retardant in electrical and electronic equipment, polyurethane foam, textiles and means of transportation.
A possible risk of secondary poisoning of top predators due to the production of polyurethane foam and their subsequent use.
The body consists of two layers of polyester & multi layer fiber glass with stripes of polyurethane foam having a density of 42,5 kg/m3 in between.
For this and beams board recommended to moisturize for better adhesion on wet surface between beams sprayed polyurethane foam with a thin layer.
As a frame, which imparts additional rigidity product uses a sophisticated two-component- High-strength polyurethane foam.
Our sandwich panels are made of a core of rigid polyurethane foam with a density of 42.5 kg/m3, injected between two layers of pre-painted galvanized steel coated with a protection film if requested by the customer.