Examples of using Cross section in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
It looks like a solid cylinder in which any cross section is a copy of the hyperbolic disk.
Cable type Cable cross section size 4mm2,
The metal floor decking formfork is made of galvanized steel sheet by roll forming, and its cross section is V-shaped,
Conductor cross section more than 800mm2 is made by segment of Milliken method to minimize skin connecting and alternating current impedance and increase power transmission capacity of cable.
That is to say, the aluminum of this conducting wire possesses the cross section of at most 500 square millimeters.
This is due to the fact that with a screw clamp aluminum, it can lose partially or even completely its cross section.
Clothing box: cross section is square shape,
Between the panel and the regulator, the recommended cable cross section is 10mm2 for 10 meters.
Conductor cross section 800mm² and below layers of pressed manner using good conductor roundness, pressed factor.
Decarburization resistance is also good big cross section of various important spring, such as automobile, locomotive, large plate spring, spring, etc.
Increase the carrying capacity of the cable. For my company's largest division conductor cross section 3000mm².
always select the nearest larger cross section value.
wear resistance/ cross section shape U/.
The cross section of the beam has two kinds of mesh and rectangle, and the bending rigidity of the rectangular section is better,
Mast with continuous tapered polygonal cross section have high load bearing strength oscillation due to wind speed and related stress are fully taken care in the design.
This is directly related with the steel length, the cross section area, and the allowable size deviation.
In any event, the cable should be well shielded and have sufficient cross section(at least 0.2 mm sq) to limit the voltage drop along its length.
the internal pressure is applied, and the cross section is changed from the polygon to the Round,
Then, the cross section was abraded with carbide papers to 1200 grit,
Light beam coupling in the stool core diameter, cross section processing is simple,