Examples of using Arduino board in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
The most commonly used Arduino boards by both engineers and hobbyists include.
工程师和业余爱好者最常用的Arduino板包括：.However, all Arduino boards have one thing in common: they are programed through the Arduino IDE.
然而，所有Arduino板都有一个共同点:它们通过ArduinoIDE编程。All Arduino boards have at least one serial port(also known as a UART or USART): Serial.
所有的Arduino控制板有至少一个串口(又称作为UART或USART)。Today, most Arduino boards are built with several different systems for serial communication as standard equipment.
今天，大多数Arduino板都是用几种不同的串行通信系统构建的标准设备。Arduino boards are available commercially in preassembled form or as do-it-yourself(DIY) kits.
Arduino板可以以预装的形式商业销售，也可以作为自己动手（DIY）套件购买。All Arduino boards have one thing in common: they are programmed through the Arduino IDE.
然而，所有Arduino板都有一个共同点:它们通过ArduinoIDE编程。Warning: Unlike other Arduino boards, the Arduino Due board runs at 3.3V.
Arduino boards can certainly be used to create homebrew connected devices, but that doesn't mean it's easy.
Arduino板当然可以用于创建连接的自制设备，但这并不意味着它很容易。It supports several Arduino boards, so you are free to select your board to write the code.
它支持多个Arduino板，因此可以自由选择你的板来编写代码。The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use setof onboard sensors for interaction.
Esplora不同于以前的所有Arduino板，因为它具有大量内置式、即用型板载传感器，从而实现了交互。However, all Arduino boards have one thing in common: they are programed through the Arduino IDE.
但是，所有Arduino板都有一个共同点：它们是通过ArduinoIDE编写的。It supports not only Arduino boards but many other boards such as Raspberry, ESP32, ESP8266 and many others.
它不仅支持Arduino板，还支持许多其他板，例如Raspberry，ESP32，ESP8266等等。By default, the resolution of the readings is set at 10 bits, for compatibility with other Arduino boards.
默认情况下，读数分辨率设置为10位，与其他的Arduino板的兼容性。The Due does not have any on-board EEPROM and is one of the more expensive Arduino boards.
Due没有任何板载EEPROM，是一个更昂贵的Arduino板。If you add a few header pins, you can even program your homemade Arduino boards in-circuit(see Figure 1-16).
如果增加几个头管脚，甚至能设计你自制Arduino板的内部电路（如图1-16所示）。How do you prepare Arduino board?
请问arduino板怎么接啊？?We connect three wires to the Arduino board.
将三根线连接到Arduino板。Use it to actively control the Arduino board.
用它来主动控制Arduino板。Upload the above code to the arduino board.
它是上传到Arduino主板上的主要代码。It is used to actively control the Arduino board.
用它来主动控制Arduino板。
