Examples of using Cleaning methods in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Fast relative to conventional cleaning methods: ultrasonic cleaning in the dust of the workpiece descaling much faster.
Most companies use traditional cleaning methods such as infiltration cleaning and spray cleaning. .
In all cleaning methods, the cleaning costs include: equipment costs and consumption costs.
For a long time, traditional cleaning methods such as mechanical methods(scraping, brush), high-pressure water, chemical cleaning(pickling), etc.…….
Second, chemical cleaning methods can easily lead to environmental pollution, and the degree of cleanliness obtained is also very limited;
For a long time, traditional cleaning methods such as mechanical methods(scraping, brush), high-pressure water, chemical cleaning(pickling), etc.…….
They will have varying amounts of stress or pressure on them, have certain aesthetic norms, will require different cleaning methods and have differing life expectancies.
Cleaning methods and cleaning quality have an important impact on the accuracy, maintenance quality, maintenance cost and service life of unit parts.
If ignition sources are found, use cleaning methods that don't generate dust clouds.
As well as cleaning with chemical cleaning agents, but these traditional cleaning methods are more prone to problems.
Low-VOC and toxin free maintenance: they require only simple, non-toxic, or low-VOC cleaning methods.
At the same time, laser cleaning can solve problems that cannot be solved using traditional cleaning methods.
High-pressure cleaning is recognized as one of the most scientific, economic and environmentally friendly cleaning methods in the world.
The door panel of the cabinet, the table surface uses different cleaning methods according to different materials.
At the same time, laser cleaning can solve traditional cleaning methods Unsolvable problem.
(4) the door panels of the cabinet, and the table tops use different cleaning methods according to different materials.
Blow molding equipment manufacturers should develop a detailed and clear system, stipulate the cleaning methods used, and regularly clean the electrical cabinets.
Th cleaning methods should be validated and confirmed its cleansing effect in order to prevent contamination or cross-contamination.
Cold Jet dry ice blasting removes 99.9% of mold spores from wood faster than traditional cleaning methods.
The cleaning and maintenance of the whole kitchen cabinet should start from the countertop, and the cleaning methods of different materials are different.