Examples of using Printed objects in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
However, the carbon-based photosensitisers can only produce printed objects that are gray or black.
然而，基于碳的光敏剂只能产生灰色或黑色的打印物体。Yet, the carbon-based photosensitizers have the ability to produce printed objects that are only black or gray.
然而，基于碳的光敏剂只能产生灰色或黑色的打印物体。The carbon-based photosensitizers will only produce all the printed objects which are grey or black.
然而，基于碳的光敏剂只能产生灰色或黑色的打印物体。It allowed more oxygen to attach to the copper powder, increasing the oxide in each layer and making the printed objects less pure.
但是，使用更细的铜粉使更多的氧气附着在铜粉上，增加了每层中的氧化物，使打印物体的纯度降低。The high thermal stability of PEF and relatively low temperature that is necessary for extrusion are optimal for recycling printed objects and minimizing waste.
PEF的高热稳定性和挤出所需的相对低的温度对于回收打印物体和使废物最小化是最佳的。The proposed quality assessment procedure allows the gradual improvement of the quality of 3D printed objects by elimination of structural defects.”.
建议的质量评估程序允许通过消除结构缺陷逐渐提高3D打印物品的质量。Moving up the value chain, healthcare, shipbuilding and aerospace are also expected to want printed objects.
提高价值链，医疗保健，造船和航空航天也需要打印物品。But the system still must scan the 3-D printed object.
但系统还时得扫描3D打印的物体。They print objects faster than they used to, and they can print larger objects(build volume).
它们打印物体的速度比以前快，并且可以打印更大的物体(构建体积)。This contraction could be used to reduce the size of a 3D printed object by up to 100 times, offering 10 times the resolution.
这种收缩可以用来将3D打印物体的尺寸减少100倍，提供10倍的分辨率。Surrey Nanosystems, producers of the amazing Vantablack dark material informed Fabbaloo they have successfully coated a 3D printed object with the world's darkest material.
近日，世界上最黑的材料Vantablack的生产商SurreyNanosystems宣布他们成功地给一个3D打印对象涂上了该材料。The trick is the use of ultraviolet light, which can be used to recolor a 3D printed object in just over 20 minutes.
诀窍是使用紫外线，可以用来在20多分钟内重新着色3D打印物体。When a printed object is found to be deviating from its theoretical dimensions, we can use this method to correct it and achieve better precision.
当发现印刷物体偏离其理论尺寸时，我们可以使用这种方法进行修正，达到更好的精度。Removal- Remove the printed object(or multiple objects in some cases) from the machine.
移出--将打印好的产品（或一些情况下的多个产品）从机器里取出来。Remove the printed object(or multiple objects in some cases) from the machine.
移出--将打印好的产品（或一些情况下的多个产品）从机器里取出来。We were trying to see whether we could replicate sensorimotor pathways inside a 3-D printed object.
我们想试试看能否在一个3D打印的物体中复制感觉运动路径。Step 6: Removal- Remove the printed object(or multiple objects in some cases) from the machine.
第六步：移出--将打印好的产品（或一些情况下的多个产品）从机器里取出来。Some printers can also combine different media to make the printed object stiff and soft.
有些打印机还可以将不同的媒体组合在一起，使打印的对象变得坚硬而柔软。The paper in 2D electrophotography is essentially representative of a single layer of a 3D printed object.
D电子照相术中的纸本质上代表3D印刷物体的单层。Some printers can also be combined with different media to make the printed object hard and soft at the other end.
有些打印机还可以将不同的媒体组合在一起，使打印的对象变得坚硬而柔软。
