Examples of using Pulse width in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Most frequency inverters today use pulse width modulation or PWM to create a variable output voltage, current, and frequency.
Two popular approaches are PWM(pulse width modulation) and MPPT(maximum power point tracking).
The picosecond pulse width can be compared to the electro-optic relaxation time and is short enough to"cold" ablate the material.
I have heard that I may be able to use Pulse Width Modulation for my application.
This system adopts the pulse width modulation controller way, and choose MOS transistor as the switch device.
A small increase of the pulse width could lead to a sample to be oxidized and burned through.
To get varying analog values, you might change or modulate the pulse width.
Due to the pulse width modulation is more suitable for digital control, so is the development use.
RAS Pulse Width This setting allows you to select the number of clock cycles allotted for the RAS pulse width, according to DRAM specifications.
What signal characteristics do you intend to use to trigger short pulses, pulse width, and narrow pulses? .
In contrast, many modern control systems adjust speed and acceleration by an electronic process called pulse width modulation(PWM).
There are two types of controllers, PWM(Pulse Width Modulation) and MPPT(Maximum Power Point Tracking).
FFT's are available for frequency domain analysis and parametric calculations can be used to measure key signal characteristics like amplitude, slope, pulse width and more.
The control section provides pwm(pulse width modulation) to determine the power transistor switching frequency and converter(Inverter) commutation timing.
Charge controllers come in two'flavors'- PWM(pulse width modulation) and MPPT(maximum power point tracking).
Thanks to the broad range of our product portfolio, we have the right products for you for the pulse width range from cw to fs.
Laser power, pulse frequency, pulse width can be preset and changed through the control panel.
The technique that determines how long each mirror tilts in either direction is called pulse width modulation(PWM).
Maximum output power ranges from 20 to 40 watts, and can be controlled through pulse width modulation(PWM).
The specific method is to change the pulse width, the pulse frequency or changes the pulse width and frequency at the same time.