Examples of using Rollers in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Precision grinding of bearing rings and rollers is an established process, which has been applied, tested and analysed over many years.
To apply the pesticide to weeds, rollers can be mounted onto small robots or tractors.
Newspapers and magazines were increasingly backing up, jamming in the roller conveyors, wearing out the rollers at an alarming rate, and causing a fire hazard.
These bearings do not have a central rib on the inner ring so longer barrel rollers can be fitted;
The cargo floor has rollers for palletized cargo but it can be flipped to provide a flat floor suitable for vehicles and other rolling stock.
Rings and rollers are made from case-hardened alloy steel of“Bearing Quality” to provide superior fatigue life and reliability.
These items are packed in a box and moved along the rollers and wrapped.
Depending on the design type, the rollers operate guided between the flanges of the outer and/or inner rings.
Rollers, hinges, and all moving hardware should be lubricated with a metal lubricant(…).
After some investigations and considering old drawings, we could find all spare parts needed except for one minor rubber strip for the rollers.
However, I went to the wood, and cut levers and rollers, and brought them to the boat, resolving to try what I could do;
If the bearing area is too small, the rollers are prone to skidding during actual operation.
The è blog topics regarding your hair, everyone can have their say: talk about products, objects, tools such as needles, plates and rollers.
Many physical therapists use foam rollers to help patients recover from injuries- and for good reason.
The company originally began making balls and rollers for the oil and gas industry, but the recession drove the company into new markets.
Small roller pitches can be implemented by using rollers with a diameter of 20 or 30 mm.
The stalk being fed into the device is first submerged into the solution and then comes into contact with rollers 108 and 107.
These cages have relatively low weight and enable a large number of rollers to be incorporated.
You can heat them in the very hot water, if the rollers can sustain the heat.
Aside from these components, typical maintenance is to vacuum the mechanism, and eventually clean or replace the paper-handling rollers.