Examples of using Subnet in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
For example, based on F, the hexadecimal value of the subnet ID being subnetted, the subnetted network prefix is[48-bit prefix]: F::/l.
例如，根据进行子网划分的子网ID的十六进制值F，子网网络前缀为[48位前缀]:F::/P。Typically, a subnet may represent all the machines at one geographic location, or on the same local area network(LAN).
通常，子网可以表示某一地理位置建筑物里或同一局域网(LAN)上的全部机器。If you do not subnet, you are only able to use one network from your Class A, B, or C network, which is unrealistic.
如果没有子网，则您只能使用A、B或C类网络中的一个网络，而这是不切实际的。You can use the address and mask of each device in order to determine to which subnet each address belongs.
您可以使用每个设备的地址和掩码，以便确定每个地址所属的子网。With IPv4 and IPv6 alike, the prefix(subnet address) changes depending on the network to which we are attached.
与IPv4和IPv6相似,前缀(子网地址)的变化取决于我们的网络连接。In choosing a subnet, the chief consideration is how many subnets you will need to support.
在选择子网时，最主要的考虑就是你需要支持多少个子网。Subnet: A separate and identifiable portion of an organization's network, typically arranged on one floor, building or geographical location.
子网：组织网络的单独和可识别部分，通常安排在一层，建筑物或地理位置.IPv6 also uses subnets, but the subnet ID is built into the address.
IPV6协议还在使用子网，但子网ID已经被内置在网络地址之中了。Typically, a subnet may represent all the machines at one geographic location, in one building, or on the same local area network(LAN).
通常，子网可以表示某一地理位置建筑物里或同一局域网(LAN)上的全部机器。If the netmask is 32 and the address is IPv4, then the value does not indicate a subnet, only a single host.
如果网络掩码是32并且地址是IPv4，那么不表示任何子网，只是一台主机。Car offloading: Currently, Uber's car docking stations for parking autonomous vehicles are resolving to one /24 IPv4 subnet.
车辆上下客：目前，Uber为自有车辆提供的车载设备底座会被解析至一个/24IPv4子网。If the netmask is 32 and the address is IPv4, then the value does not indicate a subnet, only a single host.
如果子网掩码是32并且地址是IPv4，则这个值不表示任何子网，只表示一台主机。A subnet can only be associated with one route table at a time, but you can associate multiple subnets with the same route table.
一个子网一次只能与一个路由表关联，但您可以将多个子网与同一路由表关联。The IPv6 network(subnet) is identified by the initial bits of the address called the prefix.
IPv6网络(子网)由称为前缀的地址的最初的位确定。The administrator first creates a scope for each physical subnet and then uses the scope to define the parameters used by clients.
管理员首先为每个物理子网创建一个作用域，然后使用此作用域定义客户端所用的参数。However, we also reserve the base of each subnet range plus two.
但是，我们也保留了每个子网范围基址+2的IP地址。However, each subnet did not utilize all available host addresses, which results in wasted address space.
然而，每个子网并不使用所有可用的主机地址，从而导致浪费地址空间。For example, if your default subnet encompasses the entire address range, there are no IP addresses left to create additional subnets. .
例如，如果默认子网包含整个地址范围，则不会有剩余的IP地址用于创建更多子网。Each subnet in your VPC must be associated with a route table;
在您的VPC中的每个子网必须与一个路由表关联；.When the subnet type is either SLAAC or DHCPv6 stateless, one IPv6 address from each subnet will be assigned to the Neutron port.
当子网的类型是SLAAC或者无状态的DHCPv6的时候，一个Neutron端口会被从每个子网中分配一个IPv6地址。
