WORKING TEMPERATURE in Croatian translation

the liquid in the switch, and the working temperature requirements.

tekućina u prekidaču i zahtjevi radne temperature.

It is used for high pressure boilers(the working pressure is generally above 9.8Mpa, and the working temperature is 450°C~650°C).

Koristi se za visokotlačne kotlove(radni tlak je obično veći od 9, 8Mpa, a radna temperatura 450 ° C~ 650 ° C).

According to the working temperature, these components can be divided into low-temperature

Prema radnoj temperaturi, te se komponente mogu podijeliti na niske temperature

should be prepared according to long-term working temperature rise.

treba pripremiti prema dugoročnom porastu radne temperature.

the track was dry because dry tyres at these temperatures can not be warmed up to their working temperature.

je staza suha jer gume za suho na ovim temperaturama nije moguće ugrijati na radnu temperaturu.

It is used for high pressure boilers(the working pressure is generally above 9.8Mpa, and the working temperature is 450°C~650°C).

Koristi se za kotlove pod visokim pritiskom(radni tlak je uglavnom iznad 9, 8Mpa, a radna temperatura je 450 ° C~ 650 ° C).

revival chemistry at the working temperature of the tool.

kemije oživljavanja na radnoj temperaturi alata.

Make sure the normal working temperature of the air compressor,

Provjerite je li normalan radni temperaturu zraka kompresora,

(3) Ferritic steel forgings with nominal pressure PN>1.6MPa and working temperature≤-20 degrees Celsius.

(3) Feritni čelični otkovci s nazivnim tlakom PN> 1, 6 MPa i radnom temperaturom ≤-20 stupnjeva Celzija.

It's generally used forlow ormedium pressure boiler(Working pressure≦ 5.88mpa, working temperature≦ 450℃)of the heating surface tube;

Općenito se koriste za male ili srednje kotla pod tlakom(tlak Izvodi ≦ 5.88mpa, radna temperatura ≦ 450 ℃) od površina zagrijavanja cijevi;

The latest integrated heat dissipation design, working temperature below 65degree, easy to install.

Najnoviji dizajn integriranog dizanja topline, radna temperatura ispod 65 stupnjeva, jednostavna za ugradnju.

(5) According to the specimen material type, the working temperature range, the application precision chooses the temperature self compensation coefficient

(5) Prema tipu materijala uzorka, radnom temperaturnom opsegu, preciznost primene bira koeficijent koeficijenta samopomoći temperature

that is blown out; titanium alloy high temperature titanium alloy working temperature limit of 550 degrees for the watershed,

to je pregorio Titan legure visoke temperature Titan legure radna temperatura granica od 550 stupnjeva za sliv,

Since the material is a resin, the temperature will be too high to melt and the working temperature should not exceed 100 °C. It is brittle after curing, easy to break,

Budući da materijal je smola, temperatura će biti prevelika da se rastopiti i radna temperatura ne smije prelaziti 100 ° C. To je krhki nakon stvrdnjavanja,

The DRT- 1108BAutomatic distillation tester automatically detects the atmospheric pressure of the environment and the working temperature in the tester, and automatically compensates the measurement results under the standard atmospheric pressure,

DRT-1108B automatski tester za destilaciju automatski detektira atmosferski pritisak okoline i radnu temperaturu u testeru, i automatski kompenzira rezultate mjerenja pod standardnim atmosferskim tlakom,

If the product of PS× V is more than 3000 bar. L, or if the maximum working temperature exceeds 100 °C, such thickness must Ö shall Õ

Ako umnožak PS × V prelazi 3 000 bara po litri ili je najviša radna temperatura veća od 100 °C,

aluminum and vanadium has a maximum working temperature of 550° C to 600° C. The newly developed titanium aluminum(TiAl) alloy has a maximum operating

aluminija i vanadijuma ima maksimalnu radnu temperaturu od 550 ° C do 600 ° C. Novorazvijena legura od titana aluminija(TiAl)

types are to work under higher temperatures, SmCo magnet is preferred for its comparable magnetic strength with sintered neodymium N35 grade and its max working temperature which can be up to 250-300 degree C.

SmCo magnet poželjna za usporedive jakosti magnetskog sa sinter neodimski N35 razreda i svoje radne temperaturemax koji može biti i do 250-300 stupnjeva C.

Exquisite and attractive skull shape Working temperature from -40℃ to 230℃ Made from safe food-grade silicone Can be used in oven,

Fin i atraktivan lubanjom Radna temperatura od- 40℃ do 230℃ Od sigurne hrane razreda silikon Može se koristiti u pećnicu,

The DRT- 1108B Automatic distillation tester automatically detects the atmospheric pressure of the environment and the working temperature in the tester, and automatically compensates the measurement results under the standard atmospheric pressure,

Uređaj za automatsku destilaciju DRT-1108B automatski detektira atmosferski tlak okoline i radnu temperaturu u ispitivaču i automatski kompenzira rezultate mjerenja pod standardnim atmosferskim tlakom,