Examples of using Dielectric strength in English and their translations into Danish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
insulate to increase the capacitance and dielectric strength.
it is almost clear that, the dielectric strength of vacuum switchgear recovers very fast and contact erosion is almost negligible.
high dielectric strength, and high surface
A number that describes the dielectric strength of a material relative to a vacuum,
Immersion of insulating material in oil not only increases the dielectric strength but also protects it from moisture.
The dielectric strength of an insulating oil is a measure of the oils ability to withstand electrical stress without failure.
and the decrease of the dielectric strength is slower.
conducting particles reduce the dielectric strength of an insulating oil.
The SF6 insulating properties and dielectric strength of the insulating oil is roughly 3 atm. particularly advantageous that the SF6 gas having a rapid recovery of the dielectric strength characteristics,
the simplified test and dielectric strength test of oil should be qualified.
greatly lowers the adverse impact of inductive device on the cabinet pressure test, and enhances the dielectric strength of the complete set of cabinet products.
has a very high dielectric strength; 3.
Previous: dielectric strength of insulating oil.
Time of dielectric strength: less than 10ms.
The continuing flow of gas finally de-ionises the contact gap and establishes the dielectric strength required to prevent a re-strike.
The level of gas purity on the electrical equipment of the arc performance, dielectric strength and electrical equipment life a great impact.
Clean dry oil has an inherently high dielectric strength but this does not necessarily indicates the absence of all contaminates, it may.
oil's most important property is a high dielectric strength and as a cooling liquid, a low viscosity is paramount.
Many documents describe that due to the presence of air bubbles in high electric fields, the dielectric strength of oil can be reduced by 2/3.
therefore, test on insulating oil dielectric strength is common and necessary.