SINTERING in Danish translation

• sintring
• sintrede
• sintering
• sintringen
• sintre
• sintrings

Examples of using Sintering in English and their translations into Danish

Debinding and Sintering to produce a final part that may
Debinding og Sintering for at producere en sidste del,

Bars and rods, other than those obtained simply by sintering, profiles, wire,
Stà nger, undtagen kun sintrede stà nger,

It is divided into the sintering of the unit of the department of sintering and the multi-component system.
Den er opdelt i sintringen af enheden af afdelingen for sintring og multi-komponent system.

Dead-burned"sintered" magnesia, whether or not containing small quantities of other oxides added before sintering.
Dødbrændt"sintret" magnesia, også med indhold af små mængder af andre oxider, der er tilsat før sintringen.

Parts are made from the WCu alloy by pressing the tungsten particles into a desired shape, sintering the compacted part,
Dele er lavet af WCU legeringen ved at trykke wolframpartiklerne i en ønsket form, sintre den komprimerede del

good sintering performance, good thermal
god sintrings ydeevne, god termisk

The specific surface area is an important criterion for the sintering activity(solid state sintering),
Det specifikke overfladeareal er et vigtigt kriterium for sintringen aktivitet(solid state sintring),

also for the shrinkage behavior during the sintering period.
også for adfærd krympning under sintringen periode.

In addition, it shows laser heat source temperature gradient sintering non-polluting, high efficiency and the advantages of modernization.
Derudover viser det sig, at varmekildens temperaturgradient sintrer ikke-forurenende, høj effektivitet og fordelene ved modernisering.

The cartridge of the vertical sintering part should be cut off,
Patronen af de lodrette sintring del skal skæres,

molybdenum powder pressing and sintering into tungsten, molybdenum skeleton has a porosity,
molybdænpulver presser og sintrer i wolfram, molybdænskelet har en porøsitet,

Tungsten copper electrolytic process can disperse the powder unifromly and achieve the industrial sintering requirements, which is a new kind of process with a broader appilication prospect.
Wolfram kobber elektrolytisk proces kan sprede pulveret unifromly og opnå de industrielle sintring krav, whcih er en ny form for proces med en bredere appilication udsigten.

Compared with conventional vacuum sintering process, SPS process has many advantages in nano tungsten carbide machining,
Sammenlignet med konventionel vakuum sintringsproces, SPS proces har mange fordele i nano wolframcarbid bearbejdning,

Advantages With the increasing sintering temperature, the relative density of sintered compact increases,
Med den stigende sintring temperatur, den relative tæthed af sintrede kompakte stiger, trace aktivator Ni

In addition to the ordinary sintering, there is also bulk sintering, melting, dip, and hot pressing sintering process.
Ud over den almindelige sintring, er der også bulk-sintring, smeltning, dip, og varmpresning sintringen.

Jet Fusion is best compared to laser sintering, in which a laser is used to heat granules of polymer powder
Jet Fusion er bedst sammenlignet med laser sintring, hvor en laser bruges til at opvarme granulater af polymerpulver

In the process of SPS sintering, the densification of the samples will never decrease when the temperature exceeds an optimum value.
I processen med SPS sintring, vil densifikation af prøverne aldrig falde, når temperaturen overstiger en optimal værdi.

The manufacturing process is extruded at high temperatures refractory(tungsten or tungsten carbide), sintering presses compact, penetrating with copper or silver.
Fremstillingsprocessen ekstruderes ved høje temperaturer ildfaste(wolfram eller wolframcarbid), sintringspresser kompakte, gennemtrængende med kobber eller sølv.

Study JL Johnson and RM German et al based on W-lOCu also show that when the Co content is 0.35, the sintering at 1300℃ good material properties after 1h.
Undersøg JL Johnson og RM German et al baseret på W-lOCu viser også, at når Co-indholdet er 0,35, sintrerer den ved 1300 ℃ gode materialegenskaber efter 1 time.

In Finland the annual dioxin emission was estimated to 64-82 gram I-TEQ with metal sintering and residential heating with wood as the most important.
I Finland er dioxinemissionen årligt anslået til 64-82 gram I-TEQ med sinteranlæg for metaller og boligopvarmning med træ som de største.