THREADED BUSHING in Danish translation

• gevindbøsning
• gevind bøsning
• den gevindskårne bøsning
• gevindbøsningen

Examples of using Threaded bushing in English and their translations into Danish

For the installation of the threaded bushing, we usually use the sleeve mounting wrench and the simple installation wrench to install the threaded bushing.
Til installation af gevindbøsningen bruger vi sædvanligvis skruenøgle og den enkle installationsnøgle til at installere gevindbøsningen.

In order to prevent destruction of the threaded bushing during fitting, the following maximum torques must not be exceeded.
For at udelukke en ødelæggelse af gevindbøsningerne i forbindelse med fastgørelsen, må følgende maksimale tilspændingsmomenter ikke overskrides.

Torques In order to prevent destruction of the threaded bushing during fitting, the following maximum torques must not be exceeded:
Tilspændingsmomenter For at udelukke en ødelæggelse af gevindbøsningerne i forbindelse med fastgørelsen må følgende maksimale tilspændingsmomenter ikke overskrides:

Thread insert, other names we usually called threaded bushing, screw insert,
Tråd Indsæt, andre navne vi normalt kaldet gevind bushing, screw insert,

It is the basic principle that the threaded bushing is guided firstly to force the outside diameter shrinkage to pack it into the bottom hole smoothly.
Det er det grundlæggende princip, at gevindskærmen først styres for at tvinge krympningen af den udvendige diameter til at pakke den ned i bundhullet.

If it is a bulky threaded bushing installation, it is recommended to use a tailless threaded bushing.
Hvis det er en storskruet bøsningsinstallation, anbefales det at bruge en bøsning med gevindstang.

When installing a threaded bushing, use a special tool to pass through the threaded bushing body,
Når du installerer en gevindbøsning, skal du bruge et specielt værktøj til at passere gennem det gevindforsynede bøsningslegeme,

no tail type wire threaded bushing installation speed is faster,
ingen hale type wire gevind bøsning installationshastighed er hurtigere,

The threaded bushing is embedded in the threaded holes of aluminum,
Den gevindskårne bøsning er indbygget i gevindskårne huller af aluminium,

w 3/8 Inch Threaded Bushing at Gear4music Trustscore 9.4 Log in/ Sign up As a Gear4music member you can quickly check out,
Mono w 3/8 tommers gevind bøsning Gear4music Trustscore 9.1 Log ind/ Tilmeld dig Som Gear4music medlem kan du hurtigt se og spore dine tidligere ordrer

Guide: At the end of the threaded bushing with the mounting shank, the diameter of the threaded bushing within 210o
Guide: På den ende af gevindbøsningen med monteringsskinnen reduceres diameteren af gevindbøsningen inden i 210o af monteringsskinnen,

In addition, the threaded bushing can also be used as a repair method when threading on the original substrate
Derudover kan gevindbøsningen også bruges som reparationsmetode, når du tråder på det originale substrat og klemmer tænder, for ikke at

Longer service life: As the threaded bushing is made of stainless steel,
Længere levetid: Da gevindbøsningen er lavet af rustfrit stål,

After the self-locking threaded bushing is installed in the screw hole,
Når den selvlåsende gevindbøsning er monteret i skruehullet,

When installing a small amount of threaded bushing and 14×2 or more coarse threaded bushing, it can be installed with“T”type slotted or threaded head simple tool, and be careful not to apply large axial force on the threaded bushing mounting handle in order to anti-"disorder.
Når der monteres en lille mængde gevindbøsning og 14 × 2 eller mere grov gevindbøsning, kan den installeres med"T" -typen med slidset eller gevindskåret hoved, og pas på, at du ikke anvender stor aksialkraft på det gevindforsynede bøsningshåndtag i Bestil til anti-"lidelse.

Add to Basket Key Features Replacement Jack Socket 1/4 Inch Input Mono with 3/8 Inch Threaded Bushing 2 year warranty
Læg i kurv Nøglefunktioner Erstatnings Jack stik 1/4 tommer input Mono med 3/8 tommers gevind bøsning 2 års garanti og 30 dages pengene tilbage garanti

During installation, colored thread bushing can produce lubrication and wear resistance.
Under installationen kan farvet gevindbøsning producere smøring og slidstyrke.

Stainless steel threaded bushings with fixed properties,
Rustfri gevind bøsninger med faste ejendomme,

Threaded bushings for the service life of scr….
Trådbøsninger for brugstid af skruehuller i s….

Threaded bushings are spring-like threaded connections made of high-strength,
Trådbøsninger er fjederlignende gevindforbindelser lavet af højstyrke,