Examples of using Insulator in English and their translations into Finnish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
high-stress holding devices guarantee easy installation with long life period of preformed coated insulator ties.
Insulator top tie is used for bare aerial bundled conductors in MV and HV power transmission networks.
However, when the amount of solder is large, the component placement pressure will squeeze the solder paste under the component body(insulator), and it will be melted during reflow soldering.
You can use the sealant to squeeze a small amount of sealant to one of the insulator halves and close the two halves of the terminal.
The air or gas filled space serves as an insulator between the temperature difference that exists between the inside and the outside.
Polyurethane foam- an excellent thermal insulator, andexpanding, it perfectly fills any tiny bumps
preformed top ties according to your cable specification, insulator neck diameter
Important: Plus, carpet acts as an insulator: prevents the outflow of heat
Polymer insulators, porcelain spool insulator, ceramic spool insulator, shackle insulator, butterfly insulator, post-type insulators etc.
How the hell would I know the name of the jackass… that supplied a 30 kopeck insulator to do a 50 kopeck job?
bond to the surface, acting as an insulator and this will ruin the electrode so stick with water-based lubes.
very cleverly using an insulator between them to electrically isolate each from the other.
the shiny black insulator give these electrodes a meaner look that is very pleasing on the eye.
Com where he designed an insulator for his cock ring I thought I would have a go at that too.
Insulator breakdown begins with a tiny burned spot on the magnetron insulator,
Megger meter; test power system insulators, UHV equipment
Batteries, insulators, electromagnetic currents.
Batteries, insulators, electromagnetic currents.
Ceramic insulators and insulating fittings.
High voltage suspension clamp is developed to support the conductor and insulators in overhead transmission lines.