Examples of using Postprocessor in English and their translations into French
{-}
-
Colloquial
-
Official
The command then takes following information to the postprocessor.
can be transferred to the NC program after the postprocessor is configured.
Complete machining with just one CAM software and one postprocessor for all turning and milling processes results in integrated practices for minimised machining times,
configuration of directories containing essential hyperMILL data such as postprocessor information, machine definitions
An adjusted postprocessor is required for these measurement strategies.
We consider postprocessor technology to be one of our core competen- cies.
The postprocessor must be adapted for this function.
We consider postprocessor technology to be one of our core competencies.
The same postprocessor is used for this type of Bevel cutting.
The result from using this command is controlled by the postprocessor.
The values can be used by the postprocessor.
The measuring cycle requires an adapted postprocessor.
Advices and information for correct adaptation of the own postprocessor.
The configuration element can only be restored if the postprocessor is reinstalled.
The attribute will then inform the postprocessor about equipment to be used.
There is no connection between the postprocessor and the simulation and the actual machining situation cannot be fully simulated.
Complete machining with just one CAM software and one postprocessor for all turning and milling processes results in integrated processes
Be sure that you are using a postprocessor that is made for your cutting machine.
The hyper MILL CAM software provides a unique postprocessor concept for this that has made an excellent name for itself throughout the world.
If you want to add or copy a postprocessor you can use the left mouse button