Examples of using To the switch in English and their translations into French
{-}
-
Colloquial
-
Official
access point that is connected to the switch.
All elements, from the power cable to the switch are black,
if used, speaker set and microphone to the switch 2-port example below.
If the operator won't come to the switch- then the switch must go to the operator.
etc., perpendicularly to the Switch.
Port LED Connection Speed The port LEDs indicate the connection speed for powered-on devices that are cabled to the switch.
Use the cable clips in the kit bag to fasten the cable connecting the motor to the switch along the handgrip.
connect the Black wire from the supply to the switch.
default gateway IP address that you want to assign to the switch.
etc., perpendicularly to the Switch.
Voltage loss aff ects the LED indicator for heater status if built-in and connected to the switch.
connect your computer to the switch using an Ethernet cable.
one hot black lead connected to the switch.
one hot black lead connected to the switch.
target devices attached to the switch.
standard RJ-45 connectors to connect your Access Point to the switch on the network.
duplex of the device connected to the Switch.
Alternatively, you can continue to use the console port for local CLI access to the switch.