Examples of using Display flashes in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The first"0" in the display flashes hours.
Please stand still for as long as the display flashes.
Press ON/OFF switch O; the display flashes.
Set safety cut-out(setting range: 2 h- 30 h)- Press Start/Stop button- Display flashes.
Press the SET button until the temperature on the display flashes.
On the upper right on the display flashes.
The display flashes Fault and/or Warning when these conditions occur.
The display flashes until a stable weight has been measured.
By turning the Temperature regulator, the display flashes and shows the desired temperature.
The display flashes, showing the indicator for 24-hour mode.
If zero is reached, the display flashes and a signal is emitted.
The display flashes when a value is stored.
In standby mode, the display flashes.
If there is no data received at the DMX-input, the control display flashes.
There is no DMX signal present, the display flashes and shows.
Press selection button Fig.! /6 for 3 seconds until display flashes.
no RDS station is received, the display flashes.
After this, during the body analysis, the display flashes twice.
Is the power supply connected? The display flashes in case of power failure.
When the pressure in the test mode exceeds 320 mmHg, the display flashes.