Examples of using Load impedance in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
as their maximum output depends on the line voltage and load impedance.
Low sensitivity to varying load impedance.
Load Impedance(bridged) Supply Voltage Damping Factor.
Check the load impedance(4 ohms minimum),
V(load impedance of 50 kohms
Be sure to observe the amplifiers rated load impedance, particularly when connecting speakers in parallel.
Max Output Power@ 8 Ohm 2x 200W 2x 250W 2x 350W Load Impedance minimum 4 Ohm.
The maximum output power is reached in stereo mode when connecting 4 Ω speakers minimum admissible load impedance.
checks XLR cables and measures the load impedance of 70/100 Volt speakers.
Minimum recommended load impedance 2kΩ.
Minimum recommended load impedance 600 Ω.
Recommended load impedance: 50-500 Ohm.
Depends on the load impedance Max. load current.
Headphones output: 3.5 mm stereo jack, load impedance 32 ohms or greater.
Where +4 also happens to be 1.23 volts if the load impedance is 600 ohms.
Load Impedance: 4 Ω(4 Ω to 8 Ω allowance) Tone Control Range.
Make sure that the load impedance is not lower than that rated for the amplifier.
Load impedance 4W(4W to 8W allowable) Preout maximum output level.
Load Impedance: 4 Ω(4 to 8 Ω allowance) Tone Control Range.
A load impedance of at least 1000 Ω is recommended.