Examples of using Martensite in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
See TTT-diagramMartensite Formation Temperature Temperature below which austenite transforms into martensite.
Relationship between austenitic 304 stainless steel coil and martensite size….
Both martensite and Austenite are a kind of microstructure of steel during heat treatment.
This point corresponds to the composition without filler metal martensite: risk of hardening-flaws at under 400°C.
Rapid cooling prevents the metal lattice from returning to its original structure, producing martensite.
TRIPs and complex phase, with varying volume fraction of martensite, bainite, retained austenite and ferrite.
The presence of H 2S causes sulfide stress corrosion cracking in martensite stainless steel and duplex stainless steel.
Stainless steel tube belonging to martensite(high strength steel), good wear resistance, corrosion resistance is poor.
is protected by ultra high-strength Martensite steel.
The higher the ageing temperature the more refined the martensite leading to greater ductility but slightly lower strength.
This combination of microstructures results in extremely high strengths(martensite) combined with very high ductility under bending load.
not just one kind of martensite.
The reduction in stress is achieved through the transformation of tetragonal martensit into cubic martensite which has less tension.
However, because martensite is a supersatured solid solution of carbon in a-Fe,
Below Ms martensite, to the right of the"end of transformation" curve at higher temperatures perlite, at lower temperatures bainite.
Dual-phase steel is high strength and exhibits very good forming properties thanks to its two structural constituents, ferrite and martensite.
The normal microstructure of this kind of steel is martensite, and some also contain a small amount of Austenite,
it changes from the face-centered cubic form- austenite- to the body-centered cubic form- martensite.
equal 4h martensite.
to the martensite transformation zone, and the martensite transformation occurs.